Fisher & Paykel OR90SDBGFX User Manual page 51

Care and cleaning
49
Fitting and removing the sliding shelf supports
When fitting the sliding shelf supports, make sure that you fit:
the catalytic panels first. See 'Fitting the catalytic panels' .
the side racks.
the slides to the top wire of a shelf position.
both sides of each pair of slides.
both slides on the same level.
Important!
Remove the side racks first to make removing the sliding shelf supports easier.
1
2
1
Fig. 37 Fitting the sliding shelf supports
Fig. 38 Removing the sliding shelf supports