Fisher & Paykel OR90 Series Installation Instructions And User Manual

Fisher & Paykel OR90 Series Installation Instructions And User Manual

Freestanding cooker
Hide thumbs Also See for OR90 Series:

Advertisement

Installation instructions

User guide
and
Freestanding cooker
OR90 multifunction models
NZ AU

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OR90 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Fisher & Paykel OR90 Series

  • Page 1: Installation Instructions

    Installation instructions User guide Freestanding cooker OR90 multifunction models NZ AU...
  • Page 3: Table Of Contents

    Contents Safety and warnings Installation instructions SEVEN-FUNCTION OVEN MODELS Using your seven-function oven for the first time Clock and timer Using your oven Cooking functions Automatic cooking FOUR-FUNCTION OVEN MODELS Using your four-function oven for the first time Using your oven Cooking functions Using your gas cooktop Cooktop troubleshooting...
  • Page 4: Safety And Warnings

    Safety and warnings Installation WARNING! Electrical Shock Hazard Always disconnect the cooker from the mains electricity supply before carrying out any maintenance operations or repairs. Failure to follow this advice may result in death or electrical shock. WARNING! Cut Hazard Take care - panel edges are sharp.
  • Page 5 Safety and warnings Electrical This cooker is to be installed and connected to the electricity supply only by an authorised person. If the installation requires alterations to the domestic electrical system, call a qualified electrician. The electrician should also check that the electrical system is suitable for the electricity drawn by the cooker.
  • Page 6 Safety and warnings Operation Your freestanding cooker has been carefully designed to operate safely during normal cooking procedures. Please keep the following guidelines in mind when you are using it: WARNING! Explosion Hazard Do not store flammable materials such as gasoline near the cooktop. Do not store flammable material in the oven or storage compartment.
  • Page 7: Important Safety Instructions

    Safety and warnings Important safety instructions Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite. Isolating switch: make sure this cooker is connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. Household appliances are not intended to be played with by children.
  • Page 8: Installation Instructions

    Installation instructions Installation instructions Dimensions and clearances Installation clearances and protection of combustible surfaces shall comply with the current local regulations eg. AG 601 (AS5601/NZS5261) Gas Installations code. Installation shall comply with the dimensions in Fig. 1, bearing in mind the following requirements: Overhead Clearances In no case shall the clearance above the highest part of the cooker be less than 600 mm or, for an overhead exhaust fan, 750 mm.
  • Page 9 Installation instructions Dotted line showing the Locating the area for gas and electrical connection position of the cooker when installed Area for gas and electrical connections Fig. 2 Area for gas and electrical connections Fitting the adjustable feet Important! Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
  • Page 10 Installation instructions Installation instructions Moving the cooker Important! To prevent damaging the adjustable feet, ensure the cooker is always lifted by two people. Do not lift the cooker by the door handles. DO NOT DRAG the cooker. Lift the feet clear of the floor.
  • Page 11 Installation instructions Fitting the anti-tilt bracket Important! To restrain the appliance and prevent it tipping accidentally, fit a bracket to its rear to fix it (Cavity width) 900 mm securely to the wall. Make sure you also fit the supplied lock pin to the anti-tilt bracket. 4 5 0 4 5 0 To fit the anti-tilt bracket:...
  • Page 12 Installation instructions Connecting the cooker to the gas supply The gas connection must be carried out by an authorised person according to the relevant standards. Before connecting the appliance to the gas main, mount the brass conical adaptor onto the gas inlet pipe, upon which the washer has been placed (see Fig.s 11-12 following).
  • Page 13 Installation instructions It is important that the hose does not come in contact with the metal of the appliance and is secured as per appropriate gas installation codes. A chain 80% of the length of the flexible gas hose must be used to prevent stress being applied to the hose. The chain should be attached securely to the product where shown (see Fig.13), and on the wall.
  • Page 14 Installation instructions Converting to a different gas type This appliance is suitable for use with Natural gas or LPG (check the “gas type” sticker attached to the appliance). To convert from one gas type to another, you need to replace the injectors, and then adjust the minimum burning setting.
  • Page 15 Installation instructions Adjusting the minimum burner setting Check whether the flame spreads to all burner ports when the burner is lit with the gas valve set to the minimum position. If some ports do not light, increase the minimum gas rate setting.
  • Page 16 Installation instructions Wiring diagram (Seven-function models)
  • Page 17 Installation instructions Wiring diagram (Four-function models)
  • Page 18: Using Your Seven-Function Oven For The First Time

    Using your seven-function oven for the fi rst time Fig. 19 Control panel Control buttons Front right (auxiliary) burner knob Clock display Rotisserie knob Function knob Function indicator light Temperature knob Temperature indicator light Front left (rapid) burner knob Rear left (semi-rapid) burner knob Central (triple-ring wok) burner knob Rear right (semi-rapid) burner knob Before using your new oven, please:...
  • Page 19: Clock And Timer

    Clock and timer Buttons: Timer Cooking time End of cooking time Decreases the number shown on the display or changes the volume of the beeps Increases the number shown on the display Fig. 21 Clock display and control buttons Illuminated symbols: - oven in manual position (on except when oven is set for automatic cooking) - flashing - oven in automatic position but not set or an automatic program has finished...
  • Page 20: Using Your Oven

    Using your oven Fig. 22 Function and temperature knobs Select the function by turning the function knob. The oven light will come on. Select the temperature by turning the temperature control knob clockwise. The oven temperature indicator light, above the temperature knob on the control panel, will glow until the oven has reached the set temperature, and then it will go out.
  • Page 21: Cooking Functions

    Cooking functions OVEN LAMP Only the oven light comes on. It remains on in all the cooking functions. BAKE The upper and lower heating elements come on. BAKE is the traditional method of cooking. It is best to cook on only one shelf at a time in this function. Ideal for large cakes and dishes that bake for several hours.
  • Page 22 Cooking functions Notes on baking: Preheat the oven before baking. Do not place anything, including water or ice, on the oven floor. Remove the fat filter before baking. Notes on using the fat filter: Use the fat filter when roasting meat and poultry on FAN BAKE, FAN GRILL or FAN FORCED.
  • Page 23 Cooking functions Start the rotisserie Select the FAN GRILL function. Set the temperature to 175 Turn the the rotisserie knob to O . Important! Always ensure that poultry is cooked thoroughly. During use, the rotisserie components become hot. If you leave the oven door open after using the rotisserie, parts of the control panel may also become hot.
  • Page 24: Automatic Cooking

    Automatic cooking Use automatic cooking to automatically turn the oven on, cook, and then turn the oven off. Check the clock shows the correct time. Select the function and temperature. The oven will come on. Decide how long the food will take to cook, allowing time for preheating if necessary. button.
  • Page 25: Using Your Four-Function Oven For The First Time

    Using your four-function oven for the fi rst time Temperature Front left (rapid) Rear right (semi-rapid) indicator light burner knob burner knob Function Temperature Rear left (semi-rapid) Central (triple-ring Front right knob knob burner knob wok) burner knob (auxiliary) burner knob Fig.
  • Page 26: Using Your Oven

    Using your oven Fig. 27 Function and temperature knobs Select the function by turning the function knob. Select the temperature by turning the temperature control knob clockwise. The oven temperature indicator light, between the knobs on the control panel, will glow until the oven has reached the set temperature, and then it will go out.
  • Page 27: Cooking Functions

    Cooking functions OVEN LAMP Only the oven light comes on. It remains on in all the cooking functions. BAKE The upper and lower heating elements come on. BAKE is the traditional method of cooking. It is best to cook on only one shelf at a time in this function. Ideal for large cakes and dishes that bake for several hours.
  • Page 28: Using Your Gas Cooktop

    Using your gas cooktop Fig 29 Cooktop layout (trivets may vary) Auxillary burner Semi-rapid burner Rapid burner Triple-ring wok burner Gas burners The knob controls the flow of gas through the safety valve. = closed valve (OFF) = maximum flow = minimum flow You can choose to cook at any heat between , but never between...
  • Page 29 Using your gas cooktop Before using your cooktop Before using your new cooktop, please: Read this user guide, taking special note of the ‘Safety and warnings’ section. Turn the power to the cooker on at the wall. Make sure all burner control knobs are turned off. Using the gas burners Choose the control knob for the burner you want to use.
  • Page 30 Using your gas cooktop If a burner does not light Check that: The cooker is plugged in and the electricity is switched on. The gas is turned on. The gas bottle is not empty (if you are using bottled gas). You have held down the knob for at least 10 seconds.
  • Page 31 Using your gas cooktop Matching cookware to burner Use flat-bottomed pans, and make sure they match the size of the burner, as shown in the following table. A small pot on a large burner is not efficient. Diameters of pans which may be used on the cooktop Burners Minimum Maximum...
  • Page 32: Cooktop Troubleshooting

    Cooktop troubleshooting Problem Possible solutions A burner does not light. Check the cooker is switched on at the wall. Check the gas supply valve is turned on and the supply to the house is working. You should hear the gas when you turn a burner on. Check the gas bottle is not empty.
  • Page 33: Care And Cleaning

    Care and cleaning Important! Before you start cleaning your cooker, please: Read these cleaning instructions and the ‘Safety and warnings’ section at the start of this user guide. Turn the cooker off at the wall. Make sure the cooker is a safe temperature to touch. Do not use a steam cleaner.
  • Page 34 Care and cleaning Burner parts and trivets You can remove and clean these parts with hot soapy water or non-abrasive detergents. Clean spills regularly before they become burnt on. Do not wash these parts in a dishwasher. After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.
  • Page 35 Care and cleaning Replacing the triple-ring wok burner Fit the burner ring to the housing as shown by the arrow in the Fig. following. Make sure the burner is not able to rotate (Fig. 38). Probe (some models only) Ignitor Ring Fig.
  • Page 36 Care and cleaning Cleaning the inside of your oven Do not use abrasive cleaners, cloths or pads to clean the enamel. Do not use any oven cleaners, abrasive cleaners, ammonia-based cleaners, products containing acids or alkalis, or detergents on the catalytic panels (not supplied with all models). Fig.
  • Page 37 Care and cleaning Cleaning the enamel cavity Clean the enamel on the inside of the oven when it has cooled down, using household detergents or an ammonia-based cleaner. You may use ‘off the shelf’ oven cleaners, if you carefully follow the manufacturers’ instructions. Caring for the catalytic panels (some models only) The catalytic panels are covered with a special microporous enamel which absorbs and does away with oil and fat splashes during normal cooking over 200 °C.
  • Page 38 Care and cleaning Cleaning the oven door glass Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they scratch the surface, which may result in shattering of the glass. The inner glass door panel can easily be removed for cleaning by unscrewing (Fig.44). When re-assembling, ensure that the inner glass is correctly positioned and do not over-tighten the screws.
  • Page 39 Care and cleaning Removing the oven door The oven door can easily be removed as follows: Open the door completely. Hook the swivel retainers of the right-hand and left-hand hinges (Fig. 46a) onto the metal bar above them (Fig. 46b). Lift the oven door slightly.
  • Page 40 Care and cleaning Replacing the oven lamp Turn the power to the cooker off at the wall. Let the oven cavity and the heating elements cool down. Remove the protective cover ‘B’ . Unscrew and replace the bulb with a new one suitable for high temperatures (300 C) with the following specifications: 230-240V, 50Hz, E14 and same wattage as the bulb being replaced (check wattage stamped on the bulb).
  • Page 41: Warranty And Service

    Warranty and service Before you call for service or assistance ... Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: Your product is correctly installed. You are familiar with its normal operation. If after checking these points you still need assistance, please refer to the Service &...
  • Page 44 Copyright © Fisher & Paykel 2009. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.

This manual is also suitable for:

Or60 models

Table of Contents