Fisher & Paykel OR90SDBGFX User Manual page 29

Buttons
sets the timer
sets the cooking time
sets the stop time for automatic cooking
set the oven temperature /
select Celsius or Fahrenheit
decreases the time and temperature
increases the time and temperature
Illuminated symbols
If the display shows
flashing
0
steadily lit
A
flashing and
beeping
steadily lit
steadily lit
To set the clock
When the power to the appliance is turned on or restored after a power failure 12:00 will flash in
the display.
1 Press and
2 Press and
3 Press and
time is set.
To change the time
1 Press and
2 Press and
After a few seconds the display will remain steadily lit, showing the time is set.
It means that...
12:00
The clock needs to be set.
The oven is set for automatic
cooking.
Automatic cooking has finished
The timer is set
The oven is heating up
together - the display will stop flashing. The clock is now set for 12:00.
together again to change the time. The display will flash
to set the time. After a few minutes the display will be steadily lit, showing the
together. The display will flash.
to set the time.
First use
12:00
Fig. 17 Clock display and control buttons
For more information
See instructions below.
See section 'Automatic cooking'
See section 'Using the electronic timer'
See section 'Using your oven'
27
A