Fisher & Paykel OR90SDBGFX User Manual page 39

Position the skewer on the supports.
3
Place the skewer on the supports, and check that the meat does not touch the grill tray.
Twist the handle off. It must not be left in the oven.
Place the rotisserie in the oven.
4
Check the fat filter is in place.
Slide the grill tray all the way to the back on shelf position 1.
Move the rotisserie drive hole cover aside (right-hand wall of the oven). Insert the skewer
fully into the rotisserie drive hole. Ensure the left hand side of the skewer is properly
located on the supports.
Start the rotisserie
5
Select the Rotisserie function.
Set the temperature.
The rotisserie will start to rotate.
Important!
Always turn the function dial to
Always ensure that poultry is cooked thoroughly.
During use, the rotisserie components become hot. If you leave the oven door open after using
the rotisserie, parts of the control panel may also become hot. Use oven mitts and take extra care,
especially when removing the rotisserie support rack from the hot oven.
Always clean the fat filter after every use. See 'Care and cleaning' .
Fig. 22c Position the
skewer on the supports
o
(off) before removing the rotisserie.
Rotisserie drive hole
Using the rotisserie
Fig. 22d Rotisserie drive hole cover
Fig. 22e Place the rotisserie in the oven
37