Bmw Motorrad Front Wheel - BMW C 650 GT Rider's Manual

The sensor wheels required for
9
wheel speed detection must also
match the system installed and
94
may not be replaced.
If you want to equip your Maxi-
Scooter with different wheels,
please speak to a specialized
workshop, and preferably a
BMW Motorrad retailer. In some
cases the data stored in the
control unit can be adapted to
the new wheel sizes.
Removing front wheel
z
Remove screws 1 and 2 on
left and right and take off front
wheel cover toward front.
Remove screw 1 and extract
the ABS sensor from its
socket.
Mask off area of wheel rim that
could be scratched in process
of removing brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake rotor on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove screws 2 of brake
calipers on left and right.
Push brake pads 3 apart
slightly by turning the brake
caliper 4 back and forth against
the brake rotor 5.
Carefully pull brake calipers
back to remove them from the
brake rotors.
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Raise Maxi-Scooter at
front, preferably using a

BMW Motorrad front wheel