BMW C 650 GT Rider's Manual page 36

to the incorrect tire inflation
3
pressure.
Correct tire inflation pressure at
34
the next opportunity.
Before adjusting the tire in-
flation pressure, observe
the information on temperature
compensation and on inflation
pressure adjustment in the chap-
ter "Technology in detail".
z
Have the tire checked for dam-
age at an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
If you are unsure about the driv-
ability of the tires:
Do not continue riding.
Contact roadside service.
Transmission error
with Tire Pressure Control
OE
(TPC/RDC)
-- --:--
" " or "
Possible cause:
The motorcycle's speed has not
exceeded the threshold of ap-
prox. 19 mph (30 km/h). The
TPC/RDC sensors do not send
their signal until after this speed
has been exceeded for the first
time (
Watch the TCP/RDC display
at a higher rate of speed. A
continuous error is only present
if the general warning light also
lights up. In this case:
Have fault eliminated at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
Possible cause:
There is a fault in the radio con-
nection to the TPC/RDC sensors.
Possible causes are radio sys-
tems in the surrounding area,
which interfere with the connec-
" is indicated.
tion between the TPC/RDC con-
trol unit and the sensors.
76).
Watch the TPC/RDC display in
another environment. A contin-
uous error is only present if the
general warning light also lights
up. In this case:
Have fault eliminated at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
Sensor defective or
system error
with Tire Pressure Control
OE
(TPC/RDC)
General warning light shows
yellow.
Tire symbol appears on the
display.
-- --:--
" " or " " is indicated.
Possible cause:
Wheels without installed TPC/
RDC sensors are mounted.