BMW C 650 GT Rider's Manual page 90

reliability of the brake system,
9
make sure that the brake pads
are not worn beyond their mini-
88
mum thickness.
Have the brake pads replaced
at an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Checking rear brake pad
thickness
Make sure ground is level and
firm and place Maxi-Scooter on
z
its center stand.
Conduct a visual inspection of
the brake pad thickness. View-
ing direction: from lower right
toward brake pads 1.
Rear brake-pad wear
limit
min 0.04 in (min 1.0 mm)
(Only friction material without
carrier plate.)
If the wear indicating marks are
no longer visible:
Dropping below the mini-
mum pad thickness leads
to reduced braking performance
and may result in damage to the
brakes.
In order to ensure the operating
reliability of the brake system,
make sure that the brake pads
are not worn beyond their mini-
mum thickness.
Have the brake pads replaced
at an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Checking brake pad
thickness of parking brake
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.