BMW C 650 GT Rider's Manual page 89

If no clear resistance points can
be felt or if the Maxi-Scooter can
be pushed:
Have the brakes checked at an
authorized workshop, preferably
an authorized BMW Motorrad
retailer.
Checking front brake pad
thickness
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Conduct a visual inspection of
the brake pad thickness. View-
ing direction: left and right be-
tween wheel and front suspen-
sion toward brake pads 1.
Front brake-pad wear
limit
min 0.04 in (min 1.0 mm)
(Only friction material without
carrier plate. Wear markings
(grooves) must be clearly visi-
ble.)
If the wear indicators are no
longer clearly visible:
Dropping below the mini-
mum pad thickness leads
to reduced braking performance
and may result in damage to the
brakes.
In order to ensure the operating
9
87
z