BMW C 650 GT Rider's Manual page 91

Conduct a visual inspection of
the brake pad thickness. View-
ing direction: from right toward
brake pads 1.
Brake-pad wear limit of
parking brake
min 0.04 in (min 1.0 mm)
(Wear markings (grooves) must
be clearly visible.)
If brake pads have dropped be-
low minimum pad thickness:
If the pad thickness drops
below the minimum thick-
ness, then braking performance
is reduced and the Maxi-Scooter
may move despite the side stand
being extended.
To prevent the Maxi-Scooter
from falling over, do not drop
below the minimum pad
thickness.
Have the brake pads replaced
at an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Checking brake fluid level
of front brake
A low fluid level in the
brake reservoir can allow air
to penetrate the brake system.
This significantly reduces braking
efficiency.
Check brake fluid level
regularly.
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
9
89
z