100 % heating output
50 % heating output
Operating passenger seat
heater
Start engine.
Seat heating can be acti-
vated only when the engine
is running.
Press button 1 on side with
two dots to switch on high
heating output (HIGH).
Press button 1 on side with
one dot to switch on low heat-
ing output (LOW).
Move button 1 into center po-
sition to switch off seat heater.
The set level 2 is shown in the
display. The second level is used
for fast heat-up of the seat; then
the switch should be switched
back to the first level. The fol-
lowing displays are available:
50 % heating output
100 % heating output
Brakes
Adjusting handbrake lever
Changing the position of
the brake-fluid reservoir can
allow air to penetrate the brake
system.
Do not reposition the handlebar
controls on the handlebars or the
handlebars in their mounts.
Adjusting the handbrake
lever while driving can lead
to accidents.
Only adjust the handbrake lever
when the Scooter is stationary.
4
45
z