Replacing defective bulb.
9
Bulbs for flashing turn
indicators, front
104
LED
To protect the glass on the
new bulb against contamina-
tion, always use a clean, dry
cloth to hold it; do not touch
with bare fingers.
z
Install bulb 3 in socket by turn-
ing clockwise.
Install socket 2 in light housing
by turning clockwise.
Close cover 1.
Replacing license plate
light
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Switch off ignition.
Pull socket 1 out of light hous-
ing.