BMW C 650 GT Rider's Manual page 55

Activation with motion
sensor
The alarm function will be acti-
vated
by pressing the button 1 of the
remote control once or
by switching off the ignition (if
programmed); after the ignition
is switched off, 30 seconds
pass until the activation phase
Activation is confirmed
by the turn indicators lighting
up twice and
with a double alarm tone.
If the alarm function is to be acti-
vated after the ignition has been
switched off for more than one
minute, then the button 1 must
be pressed for longer than one
second.
Activation phase
The anti-theft alarm system re-
quires 15 seconds until it is com-
pletely activated. No alarm trig-
gering takes place during this
time.
Protection of the battery
After approx. one hour in the
deactivated state, the DWA
switches off to protect the
battery. To activate the alarm
function after this period, the
ignition must be switched on and
then off again.
Motion sensor when
transporting Maxi-Scooter
If, for example, the Maxi-Scooter
is to be transported by train, it is
advisable to switch off the motion
sensor. The strong movements
5
53
z