Fuses; Bulbs - BMW C 650 GT Rider's Manual

Fuses

Removing fuse
If defective fuses are
bridged, this results in a
danger of short-circuit and thus a
danger of fire.
Replace defective fuses with new

fuses.

Switch off ignition.
Removing right-hand side
panel.
Pull defective fuse out of fuse
box 1 or out of fuse holder 2
with tool from onboard toolkit.
To open fuse box, press to-
gether locking lever 3 and re-
move fuse cover.
If the fuses blow frequently,
have the electrical system
checked by an authorized spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Installing fuse
Replace defective fuse with
fuse with required amperage.
An overview of the fuse as-
signment and the required
amperages is provided in the
chapter "Technical Data". The
numbers in the graphic match
the fuse numbers.
Close fuse cover.
Locking device engages.
Installing side panel (

Bulbs

Replacing bulbs for low-
beam and high-beam
headlight
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Switch off ignition.
To replace bulb for low-beam
headlight, remove right-hand
side panel.
To replace bulb for high-beam
headlight, remove left-hand
side panel.
9
101
109).
z