Manual Control (3) - Sony DVP-K800D Service Manual

Display of basic machine
Manual Contorol 2
SA.FFFFFF SI.FF ENG.00
0.Pause off 4.Eject
1.FCS.Srch off 5.Load
3.Tilt_H off
DVD SL 12cm
Display of changer machine
Manual Contorol 2
SA.FFFFFF SI.FF ENG.00
0.Pause off 4.Open
1.FCS.Srch off 5.Close
6.Chuck
3.Tilt_H off 7.Skip
DVD SL 12cm
0. Pause Pause operation is possible by performing one track jump per one rotation of disc.
1. FCS.Srch The focus drive system is checked by applying the same voltage as the focus search.
3. Tilt_H The tilt gain is increased.
4. Eject Disc is ejected.
(Open) Tray is opened.
5. Load Loading is performed.
(Close) Tray is closed and un-chuck status is established.
6. Chuck Chucking is performed
7. Skip The disc position is skipped.

5-4-4. Manual Control (3)

Manual Control 3
SA.0364AD SI.00 ENG.00
0.FWD 32TJ 6.FJ0→1
1.RVS 32TJ 7.FJ1→0
2.FWD 500TJ 8.Li0→1
3.RVS 500TJ 9.LJ1→0
4.FWD 10kTJ →.FWD 1TJ
5.RVS 10kTJ ←.RVS 1TJ
DVD SL 12cm
The track jump and other operations are performed from this display. Check the sector information (S1) so as not to make any mistake in the
DVD_DL layer jump direction. When SI is even number, layer is 0. When Si is odd number, layer is 1. The message "CD" appears when CD
is inserted. In 1TJ and 32TJ, tracking is locked to on when executed. However the sled system returns to the initial status of execution. When
jumps except 1TJ is performed, the player enters the CLVA mode. (Except FJ1, 2)
Eject and loading can be executed using the Open/Close button.
Open and close can be executed using the Open/Close button.
Chucking is not executed by close. Operate to chuck afer closed.
5-23