Sony DVP-K800D Service Manual page 10

Cd/dvd player
Table of Contents

Advertisement

YY
64
CLV servo does not lock in within the specified time.
FG servo does not reach the target speed within the
65
specified time.
66
Spindle is not rotating at x1 speed. (RF Edge)
70
System control requests address that does not exist.
71
System control requests time code that is not used.
72
System control requests track No. that is not used.
The lock-in operation is not completed within the
73
specified number of times.
80
Continuity of address has abnormality. (DVD)
81
Cannot read address even retry is executed. (CD)
TOC read is not completed within the specified period
82
of time.
Physical Information Read Error ( CTRL DATA ECC
83
ERR)
Physical Information Read Error ( CTRL DATA
84
INSA ERR)
Physical Information Read Error ( CTRL DATA
85
FULL ERR)
Physical Information Read Error ( CTRL DATA RUN
86
OVER)
Physical Information Read Error ( CTRL DATA Time
87
Out)
88
Layer No has abnormality.
89
CD Text Data Read Error
90
Servo recovery has failed when starting a disc.
96
Auto Sequence Time Out
97
Auto Sequence has exceeded the specified times.
A0
Stop request from drive microprocessor
A1
Did not return to the mode for a specified time.
A2
Feed error. Retry is impossible.
A3
GetInfo error. Stop
A4
An attempt is made to playback a DVD-R Disc
A5
Failed to execute Decrypt
A6
SlowR. Target address of searching is illegal.
A7
Feed error. Stop
B0
Due to feeder.
B1
Due to video hang-up
B2
Error in DMX
B3
Waiting for data from SlowR
Navi Pack sector address is different during SlowR
B4
mode
B5
Video hang-up during SlowR mode
B6
Time out while waiting for ending of SlowR Gttgt
B7
Waiting for data during FF/FR
B8
Waiting for video data during FF/FR
The installed HI microprocessor ROM does not match
C0
the destination.
HI microprocessor UART1 communication port has
C1
abnormality.
EMG code is not present upon power-off request from
D0
drive microprocessor
D1
Cannot return t stop mode. Power Off
E0
Drive microprocessor - system error (STATUS ERR)
Drive microprocessor - system error (MECHAM
E1
MODE ERR)
ZZ
FF
UNKONWN
00
NO DISC
01
CD 12 cm
02
CD 8 cm
12
SINGLE DVD 12 cm
03
SINGLE DVD 8 cm
13
DUAL 12 cm
04
CDR 12 cm
14
CDR 8 cm
05
DVDR 12 cm
15
DVDR 8 cm
— 10 —

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents