Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. DVP-K85P Serial No.______________ Note This equipment has been tested...
Important Safeguards For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them. Power sources This set should be operated only from the type of power source...
Page 4
• Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. • Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight. Antennas Outdoor antenna grounding If an outdoor antenna or cable system is installed,...
TV for an extended period of time you risk permanent damage to your television screen. Plasma display panel televisions and projection televisions are susceptible to this. If you have any questions or problems concerning your player, please consult your nearest Sony dealer.
About This Manual • Instructions in this manual describe the controls on the remote. You can also use the controls on the player if they have the same or similar names as those on the remote. • “DVD” may be used as a general term for DVD VIDEOs, DVD+RWs/DVD+Rs (+VR mode) and DVD-RWs/DVD-Rs (VR mode, video mode).
This Player Can Play the Following Discs Format of discs DVD VIDEO DVD-RW/-R DVD+RW/+R VIDEO CD/ Music CD/ CD Graphics CD-RW/-R “DVD+RW,” “DVD-RW,” “DVD+R,” “DVD-R,” “DVD VIDEO,” and “CD” logos are trademarks. Note about CDs/DVDs The player can play CD-ROMs/CD-Rs/CD- RWs recorded in the following formats: –...
Page 10
Notes • Notes about DVD+RWs/DVD+Rs, DVD-RWs/ DVD-Rs or CD-Rs/CD-RWs Some DVD+RWs/DVD+Rs, DVD-RWs/DVD- Rs, or CD-Rs/CD-RWs cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized.
Index to Parts and Controls For more information, see the pages indicated in parentheses. Front panel MIC 1 MIC 2 MIC 1 LEVEL MIC 2 ECHO LEVEL A [/1 (on/standby) button (25) B Key control buttons (41) C Disc tray (25) D A (open/close) button (25) E H (play) button (25) F X (pause) button (26)
Front panel display When playing back a DVD VIDEO/DVD-VR mode disc Disc type Playing status Lights up during Repeat Play (33) When playing back a VIDEO CD with Playback Control (PBC) (29) Disc type Playing status Lights up during A-B Repeat Play (34) When playing back a CD, DATA CD (MP3 audio)/DATA DVD (MP3 audio), or VIDEO CD (without PBC) Playing status...
Page 13
Remote A TV [/1 (on/standby) button (65) B Z OPEN/CLOSE button (26) C Number buttons (28) The number 5 button has a tactile dot.* D CLEAR button (30) E TOP MENU button (28) F C/X/x/c buttons (28) G O RETURN button (25) REPLAY/STEP/ ADVANCE/STEP buttons (26, 36) I ./>...
Guide to the Control Menu Display Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on or change the Control Menu display as follows: Control Menu display 1 Control Menu display 2 Control Menu display off You can use the Control Menu display items for KEY CONTROL, SCORE MODE, KARAOKE PON, VOCAL SELECT or, GUIDE MELODY when the player is in karaoke mode...
Page 15
List of Control Menu items Item Item Name, Function TITLE (page 36)/SCENE (page 36)/TRACK (page 36) Selects the title, scene, or track to be played. CHAPTER (page 36)/INDEX (page 36) Selects the chapter or index to be played. TRACK (page 36) Selects the track to be played.
Page 16
MODE (MP3, JPEG) (page 60) Selects the data type; MP3 audio track (AUDIO), JPEG image file (IMAGE) or both (AUTO) to be played when playing a DATA CD or DATA DVD. KEY CONTROL (page 41) Changes the key to suit your vocal range. KARAOKE MODE (page 39) Sets the player to karaoke mode.
Hookups Hooking Up the Player Follow steps 1 to 6 to hook up and adjust the settings of the player. Notes • Plug cords securely to prevent unwanted noise. • Refer to the instructions supplied with the components to be connected. •...
Step 3: Connecting the Video Cords Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of the patterns A through C, according to the input jack on your TV monitor, projector, or AV amplifier (receiver). In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor, you must use pattern C.
Page 19
If you are connecting to an S VIDEO input jack Connect an S VIDEO cord (not supplied). You will enjoy high quality images. With this connection, select “NORMAL (INTERLACE)” (default) by pressing the PROGRESSIVE button on the front panel. If you are connecting to a monitor, projector, or AV amplifier (receiver) having component video input jacks (Y, P Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length.
Using the PROGRESSIVE button By using the PROGRESSIVE button on the front panel, you can select the signal format in which the player outputs video signals (Progressive or Interlace), and the conversion method for progressive signals. The PROGRESSIVE indicator lights up when the player outputs progressive signals.
Step 4: Connecting the Audio Cords Select one of the following patterns A or B, according to the input jack on your TV monitor, projector, or AV amplifier (receiver). This will enable you to listen to sound. (red) (white) (yellow)* LINE OUT AUDIO VIDEO...
Page 22
Connecting to audio L/R input jacks This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. Connect using the audio/video cord (supplied). Yellow White (L) Red (R) • Surround effect (page 51) TV: Dynamic Theater, Dynamic, Wide, Night Stereo amplifier (receiver): Standard, Night Connecting to a digital audio...
Step 5: Connecting the Power Cord Plug the player and TV power cords into an AC outlet. Step 6: Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press >. To return to the previous adjustment, press .. Turn on the TV.
Page 24
Press X/x to select the setting that matches your TV type. If you have a 4:3 standard TV • 4:3 LETTER BOX or 4:3 PAN SCAN (page 69) If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode •...
Playing Discs Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. MIC 1 MIC 2 MIC 1 LEVEL MIC 2 ECHO LEVEL RETURN Turn on your TV. Press [/1.
Additional operations CLEAR REPLAY ZOOM SLOW PLAY Stop Pause Resume play after pause Go to the next chapter, track, or scene in continuous play mode Go back to the previous chapter, track, or scene in continuous play mode Stop play and remove the disc Replay the previous scene*...
Resuming Playback From the Point Where You Stopped the Disc Resume) The player stores the point where you stopped the disc for up to 6 discs and resumes playback the next time you insert the same disc. If you store a resume playback point for the seventh disc, the resume playback point for the first disc is deleted.
Using the DVD’s Menu A DVD is divided into long sections of a picture or a music feature called “titles.” When you play a DVD which contains several titles, you can select the title you want using the TOP MENU button. When you play DVDs that allow you to select items such as language for the sound and subtitles, select these items using the MENU...
Press X/x to select a setting. • PLAY LIST: plays the titles created from “ORIGINAL” for editing. • ORIGINAL: plays the titles originally recorded. Press ENTER. Playing VIDEO CDs With PBC Functions (PBC Playback) PBC (Playback Control) allows you to play VIDEO CDs interactively by following the menu on the TV screen.
z Hint To play without using PBC, press ./> or the number buttons while the player is stopped to select a track, then press H or ENTER. “Play without PBC” appears on the TV screen and the player starts continuous play. You cannot play still pictures such as a menu.
Creating your own program (Program Play) You can play the contents of a disc in the order you want by arranging the order of the titles, chapters, or tracks on the disc to create your own program. You can program up to 99 titles, chapters, and tracks.
To return to normal play Press CLEAR, or select “OFF” in step 3. To play the same program again, select “ON” in step 3 and press ENTER. To change or cancel a program Follow steps 1 to 3 of “Creating your own program (Program Play).”...
Playing repeatedly (Repeat Play) You can play all of the titles or tracks on a disc, or a single title, chapter, or track repeatedly. You can use a combination of Shuffle or Program Play modes. Press DISPLAY during playback. The Control Menu appears. Press X/x to select (REPEAT), then press ENTER.
Repeating a specific portion (A-B Repeat Play) You can play a specific portion of a title, chapter or track repeatedly. (This function is useful when you want to memorize lyrics, etc.) Press DISPLAY during playback. The Control Menu appears. Press X/x to select REPEAT), then press ENTER.
Searching for a Scene Searching for a Particular Point on a Disc (Search, Scan, Slow-motion Play, Freeze Frame) You can quickly locate a particular point on a disc by monitoring the picture or playing back slowly. STEP MIC 1 MIC 2 MIC 1 LEVEL MIC 2...
Note For CDs, Scan function does not work for CD Graphics only. Watching frame by frame (Slow-motion Play) m or M Press in pause mode. To return to normal speed, press H. Each time you press during Slow-motion Play, the playback speed changes.
Page 37
When playing a VIDEO CD or Super VCD with PBC Playback SCENE When playing a CD TRACK When playing a DATA CD/DATA DVD ALBUM TRACK (MP3 audio tracks only) FILE (JPEG image files only) Example: when you select CHAPTER “** (**)” is selected (** refers to a number). The number in parentheses indicates the total number of titles, chapters, tracks, indexes, scenes, album or files.
Searching by Scene (PICTURE NAVIGATION) You can divide the screen into 9 subscreens and find the desired scene quickly. RETURN Press PICTURE NAVI during playback. The following display appears. CHAPTER VIEWER Press PICTURE NAVI repeatedly to select an item. • CHAPTER VIEWER (DVD VIDEO only): displays the first scene of each chapter.
Enjoying Karaoke Using Karaoke You can enjoy karaoke (singing along with a disc) by setting this player to karaoke mode. You can connect up to two microphones (not supplied) to the player. AUDIO Setting the player to karaoke mode The player enters karaoke mode when a microphone is plugged into the MIC 1 or 2 connector.
Page 40
Adjusting the microphone Set the MIC 1/2 LEVEL control of the MIC connector to MIN. Plug a microphone (not supplied) into the MIC connector. When a microphone is connected to the MIC 1 or 2 connector, the player enters karaoke mode. Set the ON/OFF switch on the microphone to ON and turn the MIC 1/2 LEVEL control to adjust the...
Changing the Key Control) You can change the key to suit your vocal range. While playing karaoke, press one of the KEY CONTROL buttons repeatedly to find the key that suits your vocal range. 2,3,# MIC 1 MIC 2 MIC 1 LEVEL MIC 2 ECHO LEVEL...
Playing Karaoke with Any Stereo Disc Pon) You can enjoy karaoke with a stereo-recorded disc, even if it is a non-karaoke disc, by reducing the sound of the vocals. Press KARAOKE PON while playing a disc in karaoke mode The following display appears. To cancel the Karaoke Pon function Press KARAOKE PON again.
When playing a Super VCD 1:L+R 1:STEREO (The stereo sound of the audio track 1) 2:L+R 2:STEREO (The stereo sound of the audio track 2) z Hints • The channel returns to the default setting when: – you turn off the power. –...
Inserting the Applause Effect (Applause) When using the Karaoke mode, you can insert applause with cheers. Press APPLAUSE while playing a disc in karaoke mode Applause with cheers will sound each time you press the button. Notes • This effect may not work with some DVDs or during PBC playback of VIDEO CDs/Super VCDs.
Page 45
Press SCORE before singing a song in karaoke mode. The previous high score will be displayed. Press SCORE again after singing for more than a minute to view your score. z Hints • “SCORE MODE” returns to “NORMAL” (default) when the player enters standby mode. •...
Viewing Information About the Disc Checking the Playing Time and Remaining Time You can check the playing time and remaining time of the current title, chapter, or track. Also, you can check the DVD/CD text or track name (MP3 audio) recorded on the disc.
Page 47
Checking the play information of the disc To check the DVD/CD text Press TIME/TEXT repeatedly in step 2 to display text recorded on the DVD/CD. The DVD/CD text appears only when text is recorded in the disc. You cannot change the text.
Page 48
When playing a DATA CD (MP3 audio)/ DATA DVD (MP3 audio) Playing time and number of the current track Track name Current album and track number (returns to top automatically) When playing a VIDEO CD (without PBC functions), or CD Playing time and number of the current track Remaining time of the current...
Sound Adjustments Changing the Sound When playing a DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, or DTS), you can change the audio format. If the DVD VIDEO is recorded with multilingual tracks, you can also change the language.
(L: left, R: right) without using actual rear speakers. Rear (L/R) TVS was developed by Sony to produce surround sound for home use using just a stereo TV. 3 / 2 .1 This only works when playing a multichannel Dolby audio sound track.
Page 51
To cancel the setting Select “OFF” in step 2. TVS DYNAMIC THEATER Creates one set of LARGE virtual rear speakers and virtual subwoofer from the sound of the front speakers (L, R) without using actual rear speakers and subwoofer (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.
Enjoying Movies Changing the Angles If various angles (multi-angles) for a scene are recorded on the DVD VIDEO, “ appears in the front panel display. This means that you can change the viewing angle. Press ANGLE during playback. The number of the angle appears on the display.
Notes • Depending on the DVD VIDEO, you may not be able to change the subtitles even if multilingual subtitles are recorded on it. You also may not be able to turn them off. • While playing a disc with subtitles, the subtitle may disappear when you press FAST PLAY or SLOW PLAY button.
Page 54
Press X/x to select the setting you want. The default setting is underlined. • STANDARD: displays a standard picture. • DYNAMIC 1: produces a bold dynamic picture by increasing the picture contrast and the color intensity. • DYNAMIC 2: produces a more dynamic picture than DYNAMIC 1 by further increasing the picture contrast and color intensity.
Sharpening the Picture (SHARPNESS) You can enhance the outlines of images to produce a sharper picture. Press DISPLAY twice during playback. The Control Menu appears. Press X/x to select (SHARPNESS), then press ENTER. The options for “SHARPNESS” appear. Press X/x to select a level. •...
Enjoying MP3 Audio and JPEG Images About MP3 Audio Tracks and JPEG Image Files MP3 is audio compression technology that satisfies the ISO/IEC MPEG regulations. JPEG is image compression technology. You can play DATA CDs/DATA DVDs that contain MP3 audio tracks or JPEG image files.
When you insert a DATA CD/DATA DVD and press H, the numbered tracks (or files) are played sequentially, from 1 through 7. Any sub-albums/tracks (or files) contained within a currently selected album take priority over the next album in the same tree. (Example: C contains D so 4 is played before 5.) When you press MENU and the list of album...
Selecting an album Press MENU. The list of albums on the disc appears. When an album is being played, its title is shaded. 1 ( 3 0 ) R O C K B E S T H I T K A R A O K E J A Z Z R &...
Selecting a JPEG image file After step 2 of “Selecting an album,” press PICTURE NAVI. The image files in the album appear in 16 subscreens. A scroll box is displayed on the right. To display the additional image, select the bottom images and press x. To return to the previous image, select the top images and press X.
Enjoying JPEG Images as a Slide Show You can play JPEG image files on a DATA CD or DATA DVD successively as a slide show. Press MENU. The list of albums on the DATA CD/ DATA DVD appears. 1 ( 3 0 ) R O C K B E S T H I T K A R A O K E J A Z Z...
z Hints • To repeat both MP3 audio tracks and JPEG image files in a single album, repeat the same MP3 audio track or album when “MODE (MP3, JPEG)” is set to “AUTO.” See “Playing repeatedly (Repeat Play)” (page 33) to repeat the track or album. •...
Using Various Additional Functions Locking Discs PARENTAL CONTROL, PARENTAL CONTROL) You can set two kinds of playback restrictions for a disc. • Custom Parental Control You can set playback restrictions so that the player will not play inappropriate discs. • Parental Control Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users.
Page 63
To turn off the Custom Parental Control function Follow steps 1 to 3 of “Custom Parental Control.” Press X/x to select “OFF t,” then press ENTER. Enter your 4-digit password using the number buttons, then press ENTER. To play a disc for which Custom Parental Control is set Insert the disc for which Custom Parental Control is set.
Page 64
Enter or re-enter your 4-digit password using the number buttons, then press ENTER. The display for setting the playback limitation level appears. PARENTAL CONTROL LEVEL: STANDARD: Press X/x to select “STANDARD,” then press ENTER. The selection items for “STANDARD” are displayed. PARENTAL CONTROL LEVEL: STANDARD:...
Press C before you press ENTER and input the correct number. Controlling Your TV with the Supplied Remote You can control the sound level, input source, and power switch of your Sony TV with the supplied remote. Number buttons You can control your TV using the buttons below.
Page 66
Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer’s code. While holding down TV [/1, press the number buttons to select your TV’s...
Settings and Adjustments Using the Setup Display By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things. For details on each Setup Display item, see pages from 68 to 72.
Press X/x to select a setting, then press ENTER. The setting is selected and setup is complete. Example: “16:9” SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: BLACK LEVEL: BLACK LEVEL (COMPONENT OUT) 4:3 OUTPUT: To enter the Quick Setup mode Select “QUICK”...
Settings for the Display (SCREEN SETUP) Choose settings according to the TV to be connected. Select “SCREEN SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 67). The default settings are underlined. SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND:...
BLACK LEVEL (COMPONENT OUT) Selects the black level (setup level) for the video signals output from the COMPONENT VIDEO OUT jacks. You cannot select this when the player outputs progressive signals (page 20). Sets the black level of the output signal to the standard level.
PAUSE MODE (DVD VIDEO/DVD-VR mode only) Selects the picture in pause mode. AUTO The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. FRAME The picture, including subjects that do not move dynamically, is output in high resolution. TRACK SELECTION (DVD VIDEO only) Gives the sound track which contains the highest number of channels priority when you...
DOWNMIX (DVD VIDEO/DVD-VR mode only) Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see “Checking the audio signal format”...
Operation The remote does not function. , The batteries in the remote are weak. , There are obstacles between the remote and the player. , The distance between the remote and the player is too far. , The remote is not pointed at the remote sensor on the player.
Page 75
The disc tray does not open and “TRAY LOCKED” appears on the front panel display. , Contact your Sony dealer or local authorized Sony service facility. “Data error” appears on the TV screen when playing a DATA CD or DATA DVD.
, Contact your nearest cleaning cloth or check its format (page 2). correctly. Sony dealer or local authorized Sony service facility and give the 5- character service number. Example: E 61 10 Glossary Album (page 58, 61)
Page 77
DVD VIDEO (page 8) A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. The data capacity of a single-layer and single- sided DVD is 4.7 GB (Giga Byte), which is 7 times that of a CD.
Specifications System Laser: Semiconductor laser Signal format system: NTSC Audio characteristics Frequency response: DVD VIDEO (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD VIDEO (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB) Signal-to-noise ratio (S/N ratio): 115 dB (LINE OUT L/R (AUDIO) jacks only) Harmonic distortion: 0.003 %...
Language Code List For details, see pages 49, 52, 68. The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language 1027 Afar 1183 Irish 1028 Abkhazian 1186 Scots Gaelic 1032 Afrikaans 1194 Galician 1039 Amharic 1196 Guarani 1044 Arabic 1203 Gujarati...
Index Numerics 16:9 69 4:3 LETTER BOX 69 4:3 OUTPUT 70 4:3 PAN SCAN 69 48kHz/96kHz PCM 72 5.1 Channel Surround 22 A-B REPEAT 34 ADVANCE 26 ALBUM 37 Album 56 ANGLE 52 APPLAUSE 44 AUDIO 49 AUDIO ATT 71 AUDIO DRC 71 AUDIO SETUP 71 AUTO PLAY 70...
Page 81
Title 77 TITLE VIEWER 38 TOP MENU 28 TRACK 36 Track 12 TRACK SELECTION 71 TRACK VIEWER 38 Troubleshooting 73 TV TYPE 69 TVS (TV Virtual Surround) 50 Usable discs 9 Video based software 20 VIDEO CD 8 VOCAL SELECT 42 ZOOM 26...
Page 82
Tabla de contenido Conexiones ........3 Conexión del reproductor .
Conexiones Conexión del reproductor Siga los pasos 1 a 6 para conectar el reproductor y ajustar sus valores. Notas • Enchufe los cables firmemente para evitar ruidos no deseados. • Consulte el manual de instrucciones suministrado con los componentes que va a conectar. •...
Paso 3: Conexión de los cables del video Conecte el reproductor al monitor del televisor, al proyector o al amplificador (receptor) de AV con un cable de video. Seleccione uno de los patrones A a C según la toma de entrada del monitor del televisor, del proyector o del amplificador (receptor) de AV.
Page 85
Si lo conecta a una toma de entrada de vídeo Conecte la clavija amarilla del cable de audio/vídeo (suministrado) a la toma amarilla (vídeo). Disfrutará de imágenes de calidad estándar. En esta conexión, presione el botón PROGRESSIVE (progresivo) del panel frontal para seleccionar “NORMAL (INTERLACE)”...
Page 86
Uso del botón PROGRESSIVE (progresivo) El botón PROGRESSIVE (progresivo) permite seleccionar el formato de señal que utilizará el reproductor para emitir señales de video (Progresivo o Entrelazado) y el método de conversión para las señales progresivas. El indicador PROGRESSIVE (progresivo) se iluminará cuando el reproductor emita señales progresivas.
Paso 4: Conexión de los cables de audio Seleccione uno de los siguientes patrones, A o B, según la toma de entrada del monitor del televisor, del proyector o del amplificador de AV (receptor). De este modo podrá escuchar el sonido. (rojo) (blanco) (amarillo)
Page 88
Conexión a las tomas de entrada de audio izquierdo/ derecho Esta conexión utilizará los dos altavoces del televisor o del amplificador estéreo (receptor) para el sonido. Conexión mediante el cable de audio/vídeo (suministrado). amarillo blanco (I) rojo (D) • Efecto sonido envolvente (para obtener información detallada, consulte la versión en inglés del Manual de instrucciones) Televisor: Teatro Dinámico, Dinámico,...
Paso 5: Conexión del cable de alimentación Conecte los cables de alimentación del reproductor y del televisor a una toma de ca Paso 6: Ajuste rápido Siga los pasos siguientes para realizar el mínimo de ajustes básicos para utilizar el reproductor. Para saltar un ajuste, presione >.
Page 90
Presione X/x para seleccionar el ajuste que coincida con el tipo de televisor. Si tiene un televisor 4:3 estándar • 4:3 LETTER BOX (tipo buzón) o 4:3 PAN SCAN (exploración PAN) (para obtener información detallada, consulte la versión en inglés del Manual de instrucciones) Si tiene un televisor con pantalla panorámica o uno 4:3 estándar con el...
Reproducción de discos Reproducción de discos Algunas operaciones pueden ser distintas o estar limitadas en función del DVD (videodisco digital) o VIDEO CD (videodisco compacto). Consulte las instrucciones de uso suministradas con el disco. MIC 1 MIC 2 MIC 1 LEVEL MIC 2 ECHO LEVEL...
Notas sobre la reproducción de pistas de sonido DTS (sistema digital de sala de cine) de un DVD VIDEO (video de videodisco digital) • Las señales de audio DTS (sistema digital de sala de cine) se emiten sólo a través de la toma DIGITAL OUT (COAXIAL u OPTICAL) (salida digital coaxial u óptica).
Page 93
Notas • Tal vez no pueda utilizar la función de repetición o avance en ciertas escenas. • Al reproducir CD Graphics (disco compacto de gráficos), puede parecer que la imagen no se reproduce con uniformidad.
Page 96
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Sony Corporation Printed in Malaysia...
Need help?
Do you have a question about the DVP-K85P and is the answer not in the manual?
Questions and answers