2N VoiceBlue MAX User Manual page 55

Login configuration
The window helps you set the access password and name for the 2N
web interface. Use the same data for Telnet connection too.
Web configuration
Set additional parameters for the gateway web interface.
Auto logout – set the count of minutes in which the current user should be
logged out automatically.
Enable web session lock – by default, one Admin user may only be connected to
the GSM gateway at a moment. If another authorised user tries to log in, the
previous session will be aborted automatically. By activating this function you
disable such automatic logout and block any further access attempts.
Simple login form – here you can change the login window graphic lay–out. Upon
activation, the GSM gateway login page will have an anonymous appearance.
This function is recommended for connecting the gateway to the Internet
directly.
Use SMS user for SMS operations on the web – enable/disable the user
authorised for SMS sending/receiving only.
SMS user name/password – the gateway enables independent connection of a
user authorised for SMS receiving/sending only.
Report configuration
This window is used for setting details on automatic tracing generated by the GSM
gateway.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Tip
In case the gateway is in the DHCP client mode, current
assignments obtained from the DHCP server are displayed in
the IP address Subnet mask
Caution
Remember to change
first gateway configuration to avoid unauthorised access!
, and Default gateway
the username and password
items.
®
VoiceBlue MAX
during the
55