2N VoiceBlue MAX User Manual page 61

Basic Commands
System Information
ATI3
ATI4
Statistics
AT&T
AT&TIN
AT&TOUT
AT&T##
AT%TPR=mi,ci,mo,co
AT%TG0=mi,ci,0,0
AT%TG#=mi,co,ri,ro
AT%TGALL=mo.co,ri,ro
AT%T##=#,mi,ci,si,mo,co,so
AT%T##=ALL,mi,ci,si,mo,co,so
AT%TALL=ALL,mi,ci,si,mo,co,so
Description of parameters:
! When you change these
parameters, all the other
counters will be reset!!
Wireless Engines
AT&Q##
AT&QALL
AT&Gxx=atcmd
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Firmware version and copyright
Factory number
Statistics of calls via PRI interface
Statistics of incoming calls via GSM modules
Statistics of outgoing calls via GSM modules
Statistics of calls via SIM cards of GSM module
##
Setting of statistics via PRI
Setting of statistics of incoming calls via all GSM
modules in GSM group 0
Settings of statistics of GSM group #
Settings of statistics of all GSM groups
Settings of statistics of SIM card # of GSM
module ##
Settings of statistics of all SIM cards of GSM
module ##
Settings of statistics of all SIM cards of all GSM
modules
Mi/mo > Minutes of incom./outg. callsCi/co >
number of connected incom./outg. callsRi/ro >
number of re–routed incom/outg. calls in
groupSi/so > number of received/sent SMS
messages
Received GSM signal level (##=00–15)
Received GSM signal level from all GSM modules
Send command for AT commands directly to
GSM module
AT&Gxx=at+cnum – SIM card telephone
number
AT&Gxx=at+cpin="xxxx" – PIN entering
AT&Gxx=at+clck="sc",1"xxxx" – PIN request
enable
AT&Gxx=at+clck="sc",0"xxxx" – PIN request
disable
61