2N ISDN BRI GSM User Manual
  1. Manuals
  2. Brands
  3. 2N Manuals
  4. Gateway
  5. ISDN BRI GSM
  6. User manual

2N ISDN BRI GSM User Manual

2n - isdn bri gsm enterprise gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

2N - ISDN BRI GSM Enterprise
Gateway
User Manual
Version: 1.1

Advertisement

Table of Contents
loading

Related Manuals for 2N ISDN BRI GSM

Summary of Contents for 2N ISDN BRI GSM

  • Page 1 2N - ISDN BRI GSM Enterprise Gateway User Manual Version: 1.1...
  • Page 2 We hope you will be fully satisfied with the 2N – ISDN BRI GSM Enterprise for a long time. The manufacturer constantly improves the software contained in the product (the so-called firmware).

  • Page 3: Packing List

    Packing List Please check your 2N– ISDN BRI GSM Enterprise delivery for compliance with the following packing list. Item Pieces – check the 2N – ISDN BRI GSM gateway Enterprise model type according to the order number, see the type...

  • Page 5: Table Of Contents

    3.2. Point-to-Multipoint Connection...............22 SECTION 4 – BRI GSM GATEWAY CONNECTION OPTIONS ..23 4.1. Connection of ISDN TE to 2N – ISDN BRI GSM Enterprise ....24 4.2. 2N – ISDN BRI GSM Enterprise Point-to-Point Connection ....24 4.3. 2N – ISDN BRI GSM Enterprise Point-to-Multipoint Connection..27 4.4.
  • Page 6 7.4. Button Bar ....................57 7.5. Topic List and Alphabetical Glossary ............. 58 SECTION 8 - CONFIGURATION ..............59 8.1. ISDN BRI GSM Gateway Communication Establishing......60 8.2. Firmware Version Identification ............. 60 8.3. Gateway License ..................61 8.4. Load / Save Parameters ................61 8.5.
  • Page 7 9.2. LAN Communication Settings..............80 9.3. Terminal Communication ................80 9.4. GSM Gateway Behaviour................80 9.5. List of Terminal AT Commands..............81 Basic AT Commands ................81 Configuration AT Commands.............82 Tracing commands ................85 Work with SMS ..................86 9.6. Status Messages ..................87 GSM Layer Statuses................88 Command Shell Statuses..............90 Records of Events and Calls ...............90 9.7.
  • Page 9 Fig. 20 - ISDN BRI GSM Point-to-Point Connection as ISDN TE.......25 Fig. 21 - ISDN BRI GSM Point-to-Point Connection as ISDN NT ......25 Fig. 22 - ISDN BRI GSM Point-to-Point Connection as ISDN NT with Public ISDN Synchronisation ...................26 Fig. 23 - Multiple ISDN BRI GSM Gateway Connection........26 Fig.
  • Page 10 ATEUS® - ISDN BRI GSM gateway Enterprise Fig. 34 – OS Windows appeal ................43 Fig. 35 – Virtual COM port configuration window..........44 Fig. 36 – Added port in VSP Manager ..............45 Fig. 37 - DS Manager window ................45 Fig. 38 – Ethernet port settings................46 Fig.

  • Page 11: Section 1 - Product Presentation

    ATEUS® - ISDN BRI GSM Gateway Enterprise S E C T I O N 1 – Product Presentation Here is a survey of what you will find in this section: • Purpose • How to Cut Telephone Costs • Other Advantages and Applications...

  • Page 12: Purpose

    • In addition to voice transmission, 2N - ISDN BRI GSM Enterprise gateways can send and receive short text messages. This function along with other additional functions enhances the utility value of the product.

  • Page 13: Other Advantages And Applications

    2N - ISDN BRI GSM Enterprise Gateway • 2N - ISDN BRI GSM Enterprise keeps detailed records on all calls. This helps you find out easily why your bill is higher than it should be. • The Least Cost Router is flexible enough to help you set rules for GSM calling at the lowest possible operation costs.

  • Page 14: Rf Radiation Safety Precautions

    2N - ISDN BRI GSM Enterprise Gateway 1.4. RF Radiation Safety Precautions It is prohibited to use any transmitters, including GSM gateways, in areas where explosives are used, such as quarries. It is forbidden to use mobile phones and thus GSM gateways too at refuelling points.

  • Page 15: Section 2 - Installation

    2N - ISDN BRI GSM Enterprise Gateway S E C T I O N 2 – Installation Here is a survey of what you will find in this section: • Get Started • Brief Installation Guide • Proper Mounting • PC or LAN Connection* •...

  • Page 16: Get Started

    2N - ISDN BRI GSM Enterprise Gateway • Lithium Battery Replacement • Fuse Replacement 2.1. Get Started Before you start installing your BRI Enterprise gateway, get familiar with its physical structure, arrangement of connectors and status indicators, see Fig. 1, Fig. 2, and Fig. 15.

  • Page 17: Brief Installation Guide

    Fig. 2 – Top View 2.2. Brief Installation Guide • Proper mounting – 2N – ISDN BRI GSM Enterprise is designed for suspension on a vertical surface. Fit the holder included in the delivery on a wall and hang the gateway on it.
  • Page 18 Establish communication between your PC and the gateway (refer to Subs. 8.1). • 2N - ISDN BRI GSM Enterprise configuration - now use the configuration software to set all necessary gateway parameters - ISDN parameters, basic GSM parameters and tariff metering/pricing parameters, routing, restrictions, rates, system parameters, and input and switch properties.

  • Page 19: Proper Mounting

    2N - ISDN BRI GSM Enterprise Gateway 2.3. Proper Mounting • The 2N - ISDN BRI GSM Enterprise gateway is designed for mounting on a vertical surface. For this purpose a wall- mounting holder is available. Just fit the holder with dowels and screws (Fig.
  • Page 20 2N - ISDN BRI GSM Enterprise Gateway The allowed working temperature and relative humidity ranges are included in Section • Exceeding the recommended operating temperature values need not affect the gateway function immediately but may result in more rapid ageing and lower reliability.

  • Page 21: Pc Or Lan Connection

    The 2N - ISDN BRI GSM Enterprise gateway can be connected to a PC using a USB cable terminated with a USB B connector. A direct connection of 2N - ISDN BRI GSM Enterprise and a PC is necessary for the initial gateway configuration when...

  • Page 22: Antenna Connection

    2N - ISDN BRI GSM Enterprise Gateway Fig. 6 – LAN Connection Fig. 7 - RJ-45 Wiring for LAN Connection 2.5. Antenna Connection The BRI GSM gateway has one SMA antenna connector for each GSM module, see Fig. 8. An external antenna cable is connected to these connectors.

  • Page 23: Gateway Power Supply

    2N - ISDN BRI GSM Enterprise Gateway Tighten the antenna connector gently with your hand, never use a wrench! 2.6. Gateway Power Supply • Be sure to use only the mains supply adapter that is included in the gateway delivery.

  • Page 24: Sim Card Installation/Removal

    2N - ISDN BRI GSM Enterprise Gateway 2.7. SIM Card Installation/Removal Insert the SIM card into the SIM card slots with your hand as shown in Fig. 10. Please make sure that the SIM card contact plates are on the side closer to the GSM gateway antenna connectors.

  • Page 25: Fig. 11 - Te And Nt Connector Pins

    2N - ISDN BRI GSM Enterprise Gateway Fig. 11 - TE and NT Connector Pins Fig. 12 - ISDN GSM Gateway Connected as Network Terminal (NT) Fig. 13 - ISDN GSM Gateway Connected as ISDN Terminal (TE)

  • Page 26: Status Indicators

    2N - ISDN BRI GSM Enterprise Gateway Fig. 14 - Basic ISDN GSM Gateway Wiring Diagram Choose the specific wiring as shown in Section 4. 2.9. Status Indicators There is a panel with five LEDs on the gateway upper cover for a quick GSM gateway status detection (see Fig.

  • Page 27: Power Indicator

    2N - ISDN BRI GSM Enterprise Gateway Power Indicator The Power LED signals whether the BRI GSM gateway is supplied or not. Power Indicator (green) Power LED colour/status No light The system is not working. / Blown fuse. Continuous light The system is working.

  • Page 28: Gsm Indicators

    GSM Indicators The GSM 1 and GSM 2 indicators signal statuses of the respective GSM modules. Whenever the 2N - ISDN BRI GSM Enterprise gateway is started, detection of the GSM modules and SIM cards is carried out. This process is signalled by a red LED, which goes on a few seconds after voltage is supplied.

  • Page 29: Lithium Battery Replacement

    Fig. 16 – Motherboard Diagram The lithium battery only supplies the real time internal clock in the ISDN BRI GSM Enterprise gateway in the event of power failure.

  • Page 30: Fuse Replacement

    (the value should not drop below 2.9 V). A completely low battery results in the ISDN BRI GSM Enterprise gateway losing the time and date information - false data appear also in the service log buffer listing.

  • Page 31: Section 3 - Isdn Bri Extension Configuration

    S E C T I O N 3 – ISDN BRI Extension Configuration To configure your 2N - ISDN BRI GSM Enterprise gateway properly, you have to know the type of connection of your ISDN terminals. This section helps you install your GSM gateway between already interconnected ISDN terminals.

  • Page 32: Point-To-Point Connection

    2N - ISDN BRI GSM Enterprise Gateway 3.1. Point-to-Point Connection Point-to-Point (EuroISDN with DDI) configuration interconnects directly one ISDN terminal (TE) with a network terminal (NT) (see Fig. 17). This type is applied mainly where PBXs are connected to the ISDN.

  • Page 33: Section 4 - Bri Gsm Gateway Connection Options

    BRI GSM Enterprise gateway to the ISDN Basic Rate extension. This section includes: • Connection of ISDN TE to 2N – ISDN BRI GSM Enterprise • 2N – ISDN BRI GSM Enterprise Point-to-Point Connection • 2N – ISDN BRI GSM Enterprise Point-to-Multipoint Connection •...

  • Page 34: Connection Of Isdn Te To 2N - Isdn Bri Gsm Enterprise

    2N - ISDN BRI GSM Enterprise Gateway 4.1. Connection of ISDN TE to 2N – ISDN BRI GSM Enterprise The connection in Fig. 19 provides communication via a GSM gateway without PSTN connection. The ISDN telephone set is connected to the NT port of the GSM gateway, while a mains adapter simulating power supply from the public network is connected to the TE port.

  • Page 35: Fig. 20 - Isdn Bri Gsm Point-To-Point Connection As Isdn Te

    2N - ISDN BRI GSM Enterprise Gateway Fig. 20 - ISDN BRI GSM Point-to-Point Connection as ISDN TE Fig. 21 - ISDN BRI GSM Point-to-Point Connection as ISDN NT...

  • Page 36: Fig. 22 - Isdn Bri Gsm Point-To-Point Connection As Isdn Nt With Public Isdn Synchronisation

    Fig. 22 shows the possible connection of the GSM gateway as an NT and the gateway synchronisation is derived from the BRI extension. Fig. 22 - ISDN BRI GSM Point-to-Point Connection as ISDN NT with Public ISDN Synchronisation Fig. 23 - Multiple ISDN BRI GSM Gateway Connection...

  • Page 37: Isdn Bri Gsm Enterprise Point-To-Multipoint Connection

    ISDN BRI GSM gateway LCR table. Fig. 26 shows the ISDN BRI GSM gateway as a pass-through router for a Point-to-Multipoint connection. Calls are routed automatically to the GSM network or ISDN according to the GSM gateway LCR table.

  • Page 38: Fig. 25 - Bri Isdn Gsm Gateway Connection As Pass-Through Router

    2N - ISDN BRI GSM Enterprise Gateway Fig. 25 - BRI ISDN GSM Gateway Connection as Pass-Through Router with PBX Fig. 26 - BRI ISDN GSM Gateway Connection as Pass-Through Router for Point- to-Multipoint Subscriber Bus...

  • Page 39: Section 5 - Telephony Via Isdn Bri Gsm Gateway

    This section includes: • Functions Supported by 2N – ISDN BRI GSM Enterprise • Call Routing Rules • LCR table • Routing of Outgoing GSM Calls •...

  • Page 40: Functions Supported By 2N - Isdn Bri Gsm Enterprise Gateway

    2N - ISDN BRI GSM Enterprise Gateway 5.1. Functions Supported by 2N – ISDN BRI GSM Enterprise Gateway • Call routing according to time and called destination through the destination's operator; • Intelligent incoming CLIP routing; • Auto CLIP routing;...

  • Page 41: Lcr Table

    PBX and wait for further dialling to GSM networks. If necessary, this function can be restricted by defining a password or selecting the CLIP. Routing of outgoing calls via the ISDN BRI GSM gateway proceeds as follows:...
  • Page 42 2N - ISDN BRI GSM Enterprise Gateway • The calling subscriber dials a number. • If the number is evaluated as the "access to the GSM gateway“, the table of barred numbers is searched and if a match is found, the call request is rejected.

  • Page 43: Fig. 27 - Routing Of Outgoing Calls To Gsm Network

    2N - ISDN BRI GSM Enterprise Gateway • The gateway is able to generate tariff rate pulses - AOC - during an outgoing call, which, if the GSM gateway is connected to the PBX, allows for call cost logging per user.

  • Page 44: Routing Of Incoming Gsm Calls

    2N - ISDN BRI GSM Enterprise Gateway 5.5. Routing of Incoming GSM Calls Incoming calls from the GSM network are subject to the algorithm described in Fig. 28 and the following steps: Incoming calls are processed according to the Mode parameter in the GSM incoming groups chart.
  • Page 45 2N - ISDN BRI GSM Enterprise Gateway • In case the calling number is not included in the AutoCLIP routing chart, or the AutoCLIP routing function is disabled, the gateway receives the incoming call and either replays a voice message or transmits the dial tone to the calling party.

  • Page 46: Fig. 28 - Incoming Call Processing Procedure

    2N - ISDN BRI GSM Enterprise Gateway Fig. 28 - Incoming Call Processing Procedure...

  • Page 47: Disa Message Recording

    2N - ISDN BRI GSM Enterprise Gateway 5.6. DISA Message Recording If the DISA function is enabled and a welcome message recorded, this voice message is replayed to every incoming call whose number is not included in the AutoCLIP routing table. After the message is replayed, the gateway waits for the first DTMF digit for a timeout defined in the GSM incoming groups –...

  • Page 48: Disa Message Recording Using Terminal And Gsm Phone

    2N - ISDN BRI GSM Enterprise Gateway DISA Message Recording using terminal and GSM phone Recording of DISA message Open terminal window (see Subs 9). • Establish connection with your GSM phone using AT command: at!sg0=phone_number_of_your_GSM_phone • Accept incoming call from your GSM gateway by GSM phone.

  • Page 49: Kapitola 6 - Ethernet Port Configuration

    2N - ISDN BRI GSM Enterprise Gateway K A P I T O L A 6 Ethernet port configuration This chapter focuses on installation and configuration of Ethernet port for communication over 10BASE-T computer network. This port is optional part of the gateway. It is possible to skip this chapter if your gateway is not equipped with this port.

  • Page 50: Installation Of Ethernet Port Drivers

    2N - ISDN BRI GSM Enterprise Gateway 6.1. Installation of Ethernet port drivers Run SETUP.EXE to start the installation program. Click the “Next” button after the opening of the Welcome window. (See Fig. 29). Fig. 29 – Ethernet port installation Welcome window Install all optional parts of the installation as is shown on the Fig.

  • Page 51: Fig. 30 - Selection Of Optional Part Of Installation

    2N - ISDN BRI GSM Enterprise Gateway Fig. 30 – Selection of optional part of installation Wait until the installation successfully finishes. Fig. 31 – End of installation In the following window check „Open program folder“ checkbox. (See Fig. 32).

  • Page 52: Virtual Com Port Installation

    2N - ISDN BRI GSM Enterprise Gateway Fig. 32 – Open program folder checkbox 6.2. Virtual COM port installation To communicate with the gateway over Ethernet port it is necessary to install virtual COM port on your PC. For installation of virtual COM port use “VSP Manager”, which is possible to run...

  • Page 53: Fig. 34 - Os Windows Appeal

    2N - ISDN BRI GSM Enterprise Gateway Clicking on the “Add” button start the adding of new virtual COM port. On the appeal of OS Windows answer by clicking the “Continue” button. (See Fig. 34) Fig. 34 – OS Windows appeal After that the installation of new virtual COM port begins.

  • Page 54: Fig. 35 - Virtual Com Port Configuration Window

    2N - ISDN BRI GSM Enterprise Gateway Fig. 35 – Virtual COM port configuration window Clicking “OK” button confirm the changes and close the configuration window. Added port shows up in the VSP Manager window.

  • Page 55: Virtual Com Port Additional Configuration

    2N - ISDN BRI GSM Enterprise Gateway Fig. 36 – Added port in VSP Manager 6.3. Virtual COM port additional configuration To find out and change the virtual port configuration use the DS Manager, which is the part of the installation. The DS Manager is possible to run from the installed program folder.

  • Page 56: Fig. 38 - Ethernet Port Settings

    2N - ISDN BRI GSM Enterprise Gateway present in the BRI Enterprise gateway. This program allows uploading of new firmware to the converter, which is present on the installation CD. Fig. 38 – Ethernet port settings Please keep parameters of RS232 port as shown on the Fig. 39.

  • Page 57: Section 7 - Introduction Of Configuration Program

    2N - ISDN BRI GSM Enterprise Gateway S E C T I O N 7 Introduction of Configuration Program This section introduces the 2N – ISDN BRI GSM Enterprise configuration software, which is part of the installation CD supplied together with the gateway.

  • Page 58: Isdn Gsm Program Installation

    To facilitate the administration of more than one 2N - BRI ISDN GSM Enterprise gateway it is possible to use Gateway selection window. This window is located in menu “File – Gateway Selection”...

  • Page 59: Fig. 40 - Gateway Selection Window

    2N - ISDN BRI GSM Enterprise Gateway Fig. 40 – Gateway Selection Window • Add - click on Add to open a window with some essential data necessary for the gateway identification (see Fig. 40). Enter the gateway name chosen by you into the Gateway name item. To control the gateway using the LAN, complete the Gateway address, Username and Password.

  • Page 60: Fig. 41 - Gateway Editing Window

    2N - ISDN BRI GSM Enterprise Gateway Fig. 41 – Gateway Editing Window • Edit – used for editing identification data on the gateway entered. To edit the data, select the required gateway from the list of used gateways and click on Edit.

  • Page 61: Configuration Program Basic Menu

    2N - ISDN BRI GSM Enterprise Gateway • Main menu • Button bar menu (also contained in the main menu) • Card menu with tags • Topics with configuration items • Alphabetical glossary with configuration items arranged in alphabetical order.

  • Page 62: File

    2N - ISDN BRI GSM Enterprise Gateway • Settings – menu items for Gateway selection, gateway Communication settings and Language setting of the configuration software. • Help – information on the About application of the configuration software together with contacts to the technical support personnel.

  • Page 63: Fig. 44 - Tracing Window

    2N - ISDN BRI GSM Enterprise Gateway • Call data records – information on accomplished calls for telephone bill control and telephone cost logging per party if necessary. • Actual calls – information on currently made calls. • Statistics – helps download statistic data concerning the count of called minutes, incoming and outgoing calls, sent SMS, etc.

  • Page 64: Fig. 45 - Modules Diagnostics Window

    • Establish communication with the gateway (refer to Subs. 8.1). • Click on the button and find the firmware file in your PC directory in the format of P2009-V-*.hex. Press Open to get the file ready for uploading into the 2N - ISDN BRI GSM gateway Enterprise.

  • Page 65: Fig. 47 - Key Finding And Uploading Window

    2N - ISDN BRI GSM Enterprise Gateway • Click on to start the firmware uploading procedure. • The program starts uploading the firmware automatically. The gateway is in the reset mode during the process. Do not interrupt the firmware uploading process to avoid firmware damage and gateway failure.

  • Page 66: Setting

    This menu is available under (Alt + e). • Communication setting - helps set the type of communication of the 2N - ISDN BRI GSM Enterprise gateway configuration software. By clicking on this item you open a configuration window (see Fig. 48). You can use a USB cable, LAN or Internet for communication with the GSM gateway.

  • Page 67: Help

    2N - ISDN BRI GSM Enterprise Gateway setting item. The serial communication mode is suitable for the initial setup of the gateway. TCP/IP – used for GSM gateway configuration via the Internet or LAN. Be sure to set the correct gateway IP address before configuring.

  • Page 68: Topic List And Alphabetical Glossary

    2N - ISDN BRI GSM Enterprise Gateway Fig. 49 – GSM Configuration Program Button Bar 7.5. Topic List and Alphabetical Glossary Select the more convenient of the two arrangements of configuration program items (Fig. 50). The sections below are arranged according to the Topic list.

  • Page 69: Section 8 - Configuration

    2N - ISDN BRI GSM Enterprise Gateway S E C T I O N 8 Configuration This section describes the 2N - ISDN BRI GSM Enterprise gateway setting using the GSM configuration software that is part of the installation CD supplied together with the gateway.

  • Page 70: Isdn Bri Gsm Gateway Communication Establishing

    2N - ISDN BRI GSM Enterprise Gateway GSM Basic Parameters • GSM outgoing groups • Chyba! Nenalezen zdroj odkazů. • Network • LCR table 8.1. ISDN BRI GSM Gateway Communication Establishing Select the gateway to be configured from the list of gateways available in the Main menu (refer to Subs.

  • Page 71: Gateway License

    2N - ISDN BRI GSM Enterprise Gateway 8.3. Gateway License The operation of every new 2N - ISDN BRI GSM Enterprise gateway is limited to 850 hours. Every gateway reset reduces the remaining gateway operation time by one hour. To identify the GSM gateway status use the Functions –...

  • Page 72: System Parameters

    Data may be recorded on incoming, outgoing, successful or unsuccessful calls, or the CDR mode can be disabled. • Unit ID – used for designation of the selected ISDN BRI GSM gateway in case there are more devices in the network that generate the CDR.

  • Page 73: Isdn Parameters

    2N - ISDN BRI GSM Enterprise Gateway • SIM cards PIN number – enter the PIN code to be entered automatically for new SIM cards. The PIN codes of inserted SIM must be same. • Date to move to summer time [dd:mm] – enter the day on which winter time should be changed into summer time for LCR purposes.

  • Page 74: Isdn Mode

    2N - ISDN BRI GSM Enterprise Gateway ISDN mode • Protocol – GSM ISDN gateway has fixed protocol setting of BRI1 and BRI2 ports. Port BRI1 is used for connecting of the gateway as network termination and BRI2 for connecting of the gateway as terminal equipment.

  • Page 75: Progress Elements

    2N - ISDN BRI GSM Enterprise Gateway • Few digits on OVERLAP dial mode – the incoming call was rejected because the number of digits of the calling party's dialling was too low for successful connection (default = 102 – Recovery on Timer Expiry).

  • Page 76: Isdn Functions

    2N - ISDN BRI GSM Enterprise Gateway ISDN functions • x-th day in month delete statistics – by setting this item at 0 you disable the monthly deletion of statistic data. By selecting another number than 0 you make the statistics deleted on the particular day of a month.

  • Page 77: Gsm Basic Parameters

    2N - ISDN BRI GSM Enterprise Gateway 8.7. GSM Basic Parameters Fig. 53 – Basic GSM Parameter Editing Window This card contains basic settings for routing calls to the external GSM ports of the gateway. The Default button sets the default values.
  • Page 78 2N - ISDN BRI GSM Enterprise Gateway • Wait for next digit [s] – a timeout during which the GSM gateway waits for another digit of the subscriber dialling. After this timeout, if the count of received digits is sufficient, the gateway tries to make connection.

  • Page 79: Gsm Outgoing Groups

    8.8. GSM outgoing groups Fig. 54 - Outgoing GSM Group Editing Window The 2N - ISDN BRI GSM Enterprise gateway allows you to work with two groups of outgoing calls. You can select different settings for each of them with respect to establishing connections, count of called minutes and sent messages within a period.
  • Page 80 2N - ISDN BRI GSM Enterprise Gateway • CLIR – This parameter defines whether or not the calling SIM card telephone number shall be displayed to the called party. It is not recommended to present the telephone number of the SIM card inserted in the GSM module to the called party to avoid problems with calling back.
  • Page 81 2N - ISDN BRI GSM Enterprise Gateway Example: If, from the viewpoint of the GSM provider, a call shorter than 60s is billed as a 60s call, set the Minimum length of call after connect at 60s. If the GSM provider bills calls in seconds after the first 60s, set the Procession of counting length of call at 1 s.

  • Page 82: Gsm Incoming Groups

    8.9. GSM incoming groups Fig. 55 - Incoming GSM Group Editing Window The 2N - ISDN BRI GSM Enterprise gateway allows you to work with two groups of incoming calls. You can select different settings for each of them with respect to establishing incoming calls.
  • Page 83 2N - ISDN BRI GSM Enterprise Gateway • Receive incoming calls + dialtone – incoming GSM calls are received incoming calls from the GSM network are received and, if defined so, the DTMF with a simulated dialtone is enabled for the incoming call.

  • Page 84: Network List

    2N - ISDN BRI GSM Enterprise Gateway • CLIP – the '+' character from the CLIP shall be replaced with a sequence of digits included in this field. • Voice message loop [min]: - DISA for incoming calls is repeated for time interval filled in this field in minutes.

  • Page 85: Lcr Table

    2N - ISDN BRI GSM Enterprise Gateway • Table of replaced prefixes – a table of prefixes to be replaced (e.g. '+420' with '0'). This change is made before the prefix table is checked. • Table of prefixes – a table of called prefixes. You can define the dialling length too here.

  • Page 86: Fig. 58 - Lcr Table Data Entering

    2N - ISDN BRI GSM Enterprise Gateway Fig. 58 – LCR table Data Entering By completing the LCR data adding table you set one call routing rule. • Network ID – select a group from the Network list in the pull-down menu to which the routing rule should apply.
  • Page 87 2N - ISDN BRI GSM Enterprise Gateway • Edit – you can edit a routing rule from the LCR table by pressing this button. • Remove – deletes a routing rule selected from the LCR table list.
  • Page 88 2N - ISDN BRI GSM Enterprise Gateway...

  • Page 89: Section 9 - Configuration Using Terminal

    S E C T I O N 9 – Configuration Using Terminal It is possible to communicate with the 2N - ISDN BRI GSM Enterprise gateway through a USB port connected as a virtual COM port or through the LAN. Both the connections allow for a uniform way of gateway configuration using AT commands.

  • Page 90: Usb Communication Settings

    9.2. LAN Communication Settings To communicate with the 2N - ISDN BRI GSM Enterprise gateway through the LAN, set the LAN IP address first. To do this you need a direct USB PC connection. You can use such programs as HyperTerminal, Putty, etc.

  • Page 91: List Of Terminal At Commands

    2N - ISDN BRI GSM Enterprise Gateway 9.5. List of Terminal AT Commands All commands start with AT by default. (Note: Some of the below mentioned AT commands may not be available in the current firmware versions.) Basic AT Commands ...repeat last command (without AT)

  • Page 92: Configuration At Commands

    2N - ISDN BRI GSM Enterprise Gateway &M1 ...enable ansi colors &M9 ...start matrix &U ...view logged users &I## ...view gsm moninfo (dBm = siganl level whn registering with BTS, RxLEV = minimum signal level required by BTS for registering of GSM module)
  • Page 93 2N - ISDN BRI GSM Enterprise Gateway %I05=c1,c2,c3,c4 ...cause codes for failed calls c1=dial timeout (TIMEOUT=120) c2=dis.prefix (REJECT=21) c3=req.mod/grp not ready (TEMPFAIL=41) c4=pref grps not ready (CONGEST=42) %I06=sack,proc,prog,ale ...prog.elem (0=off,1..8) for isdn message %I07=opx/npx,..list of old/new prefixes (max 47 chars) %I09=day,bits,enb ...day (0=off,1..31) of clearing pri stat...
  • Page 94 2N - ISDN BRI GSM Enterprise Gateway b3=(notused), nasms tout (0=off, 1..20sec) %G9#=mode,min,max,tout,day,dial,clip ...inc.module 1..2 params mode (0=reject,1=ignore,2=ok-message,3=ok-tone) mode (4..7=0..3 + autocallback, 6..7= + ext.callback) min(0..20), max(0..20) tout (0..20 sec) dtmf dial-in day (0=off,1..31) of clearing inc.group stat dial prefix (max 15 ch), clip prefix (max 7 ch) %G9#=xxx,xxx,...xxx...

  • Page 95: Tracing Commands

    2N - ISDN BRI GSM Enterprise Gateway Routing Paramaters %A##=clip,dial,limit ...set autorouting item (ix 0..95) clip (20), dial(20), limit(0=off,1..99 minutes) %R##=net,hh:mm/hh:mm/w+-,groups,lim ...set lcr-routing item (ix 0..63) net (1..8), groups = (max 7 chars=1..3,9), 3=any module, 9=bri2 call limit (0=off, 1..99min) last LCR table line must be empty ;...

  • Page 96: Work With Sms

    2N - ISDN BRI GSM Enterprise Gateway Work with SMS SMS sending and receiving commands AT!G=A6 Start low-level controlling for SMS (can run only on one port) AT!G=55 Stop low-level controlling on used port Control SMS AT^SX=ch …(sms listing) request to list all SMS messages and status confirmations saved on SIM card.

  • Page 97: Status Messages

    2N - ISDN BRI GSM Enterprise Gateway 9.6. Status Messages ISDN Layer 1 Status Messages Name Description DEACT Deactivation – no signal received ACTIVE Activation – full synchronisation achieved (frame,multiframe,crc) SIGNAL Signal received – no synchronisation SYNC Signal received – only partial synchronisation (frame)

  • Page 98: Gsm Layer Statuses

    2N - ISDN BRI GSM Enterprise Gateway GSM Layer Statuses GSM Layer 2 Status Messages Name Description Followed by INIT GSM module initialisation start PINREQ SIM0 Module switch to internal SIM card INIT PINREQ Module PIN request PINSET PINSET PIN value sending to module...
  • Page 99 2N - ISDN BRI GSM Enterprise Gateway Layer 4 Status Messages Name Description NULL Rest status, ready for call MORE Call request received from GSM or ISDN, awaiting further dialling or timeout SETUP Call request sent to opposite interface PROC...

  • Page 100: Command Shell Statuses

    2N - ISDN BRI GSM Enterprise Gateway Command Shell Statuses Command Line Status Messages Name Description IDLE Rest status, awaiting AT commands REQUEST Communication with GSM module upon AT&G command is displayed REPORT Active tracing LOGFILE Content of log file is being written out...

  • Page 101: Records On Operation (Log)

    2N - ISDN BRI GSM Enterprise Gateway 9.7. Records on Operation (LOG) Type Text Description POWER [Power on] System switched on [Power off] System switched off [Warm boot] Restart of system, unknown cause [Watchdog] Restart of system by watchdog [BKPT code]...
  • Page 102 2N - ISDN BRI GSM Enterprise Gateway Type Text Description G2-ERR ATD/ERROR init (g##) Error of isdn layer 2: restart of module g## after rejected command ATD by GSM network GSM Cause 150 (g##) Error of isdn layer 2: restart of module g## after cause 150 was...

  • Page 103: Records On Calls

    2N - ISDN BRI GSM Enterprise Gateway 9.8. Records on Calls Example of a successfully connected call: 06.12.05/15:44:57 O-OK CAU-016 p01/g01 GRP-3 0:18 000:12 00000.00 737111074 1/230030102122930 • 1st column: ** • 2nd column: call start date/time • column: call type •...

  • Page 104: Statistics - Description

    2N - ISDN BRI GSM Enterprise Gateway 9.9. Statistics – Description [ Total statistics ] network (reset) minutes hhhh:mm:ss calls reject failed c.offs errors ------------------------------------------------------------------------------------------------------------------------------------ #bri1 inc (0.00) 0:02:21 #bri2 inc ( 0.00) 0:00:00 network (reset) minutes hhhh:mm:ss calls reject failed red.in...
  • Page 105 2N - ISDN BRI GSM Enterprise Gateway • C.offs - number of unconnected calls (terminated by the calling party) • Errors - number of unconnected calls (wrong requests - dialled prefix, etc.) • Red.in - number of connected calls (re-routed to this GSM group) •...
  • Page 106 2N - ISDN BRI GSM Enterprise Gateway...

  • Page 107: Section 10 - Technical Parameters

    2N - ISDN BRI GSM Enterprise Gateway S E C T I O N 1 0 – Technical Parameters GSM: GSM 900 phase II, EGSM 1800 MHz, GSM 850 MHz , Mobile network type EGSM 1900MHz – according to the GSM module used SIM card plug-in 3 V ("small")
  • Page 108 2N - ISDN BRI GSM Enterprise Gateway Power Supply: Adapter 230 V±10%, 50/60 Hz / 12V DC DC power supply 12 V DC / 1 A Supply connector DC jack, 2.1 mm Lithium battery CR2032 ISDN: So, point to multipoint...
  • Page 109 2N - ISDN BRI GSM Enterprise Gateway ©2005 2N TELEKOMUNIKACE a.s. - Praha, PB 1272 v.1.1...

Table of Contents