Custom Box (Using A Custom Box) - Triumph Adler P-C2160DN Operation Manual

Custom Box
>Select Box
?0001:Box 1
>Select Box
?0001:Box 1
>Select Box
0001:Box 1

Custom Box (Using a Custom Box)

IMPORTANT To use a Custom Box, an optional SSD must be in-
stalled in the printer. The SSD must be formatted from the printer. For
more information, refer to SSD (Using the optional SSD) on page 4-
67.
A Custom Box is general-purpose box that allows users to store print data
on the printer's SSD so that it can be reused as required.
Use the Embedded Web Server RX to create and delete a Custom Box,
but use the printer driver to send data stored in the box. For more
information, refer to the Embedded Web Server RX User Guide and
Printing System Driver User Guide.
Use the printer's operation panel to print the print data stored in a Custom
Box.
The options available in Custom Box are as follows:
• Select Box (Box number : Box name) (Selecting the Custom Box)
• Print Box List (Prints a Custom Box list)
1
Press [MENU].
2
Press  or  repeatedly until Custom Box > appears.
>
Select Box (Box number : Box name) (Selecting the
Custom Box)
Use this procedure to select the Custom Box containing your document.
IMPORTANT The Select Box menu item only appears when there
is a Custom Box.
1
Press  while Custom Box > is displayed.
2
Press  or  repeatedly until >Select Box > appears. The box
number and box name are displayed. (For example : 0001:Box 1)
3
Press [OK]. A blinking question mark (?) appears before the box
number.
4
Press  or  repeatedly until the desired box number and box name
is displayed. Box numbers from 0001 to 1000 are displayed. Press 
or  to scroll and view long box names.
5
Press [OK] to display the desired Custom Box.
>
Next, refer to Manipulating Data in the Custom Box on page 4-19.
IMPORTANT If you have set a password for the Custom Box, carry
out the Box Password (Box password input) step next.
4-18
Using the Operation Panel