Replacing The Waste Toner Box - Triumph Adler LP 4030 Instruction Handbook Manual

Maintenance

Replacing the Waste Toner Box

3-6
Set the new toner container in the printer and push down on the top of the
6
toner container to install it firmly in place as shown in the figure below.
Close the top cover.
7
Proceed to the next section.
When replacing the toner container, the used waste toner box in the printer
should also be replaced with the new one from the new toner kit. A new
waste toner box is included with the toner kit. The printer will not operate
without replacing the waste toner box.
Open the left cover. While holding the waste toner box, press the lock lever
1
and then gently remove the waste toner box.
Remove the waste toner box as gently as possible so as not to
NOTE:
scatter the toner inside. Do not let the opening of the waste toner box face
downward.
Lock Lever
OPERATION GUIDE