Special Paper - Triumph Adler P-C2160DN Operation Manual

Special Paper

The following types of special paper can be used:
Paper Type to be Used
Thin paper (60 to 64 g/m²)
Thick paper (90 to 220 g/m²)
Colored paper
Recycled paper
Overhead projector transparencies
Postcards
Envelopes
Label
Coated paper
Use paper that is sold specifically for use with copiers or printers (heat-
fusing type). When using transparencies, labels, thin paper, envelopes,
postcards, or thick paper, feed the paper from the MP tray. For details,
refer to Paper Source (Selecting the paper feed source) on page 4-37.
Since the composition and quality of special paper vary considerably,
special paper is more likely than white bond paper to give trouble during
printing. No liability will be assumed if moisture and so forth given off
during printing on special paper causes harm to the machine or operator.
Note Before purchasing any type of special paper, test a sample
on the machine and check that printing quality is satisfactory.
Transparency
Transparencies must be able to withstand the heat of fusing during the
printing process. The recommended transparency product is 3M CG3700
(Letter, A4).
The table below lists the specifications for transparency:
Item
Tolerance of heat
Thickness
Material
Dimensional accuracy
Squareness of corners
3-7
Paper Type to be Selected
VELLUM
THICK
COLOR
RECYCLED
TRANSPARENCY
CARDSTOCK
ENVELOPE
LABELS
COATED
Specification
Must tolerate at least 190 °C (374 °F)
0.100 to 0.110 mm (3.9 to 4.3 mils)
Polyester
±0.7 mm (±0.0276 inches)
90° ±0.2°
Handling Paper