Triumph Adler P-C2160DN Operation Manual page 107

When the Paper Runs Out During Printing
When Paper Feed Mode is set to Fixed, if the paper in the cassette
runs out during printing, Load Cassette 1 is displayed and the printer
stands by. In this event, either replenish the paper in the empty cassette
or use the procedure below to print from another paper source.
1
While Load Cassette 1 is displayed, press  or  repeatedly until
Use alternative? appears.
2
Press  or  repeatedly until the desired paper source and size
appears.
Each time you press  or , another paper cassette or the paper
size that can currently be fed from the MP tray appears.
3
Press [OK]. Printing continues.
Duplex (Duplex printing)
Using the duplexer, you can automatically print on both sides of the paper.
The duplexer is mounted underneath the printer.
Duplex printing is available for the following paper types:
PLAIN
PREPRINTED
BOND
RECYCLED
ROUGH
LETTERHEAD
COLOR
PREPUNCHED
THICK
HIGH QUALITY
Activating the duplexer is done by selecting either short edge or long
edge binding mode.
Note Duplex printing can be also performed from the MP tray. If
the paper to be fed from the MP tray does not match the paper
size and paper type of the current paper feed source cassette, a
paper jam may occur.
IMPORTANT Duplex printing for coated paper ( COATED ) is possible
if the optional paper feeder PF-530 is installed.
4-39
Using the Operation Panel