Triumph Adler P-C2160DN Operation Manual page 31

Setting Description
Management Configure the advanced management settings.
Settings Job Accounting, Authentication, Notification/Report,
History Settings, SNMP, Reset
Accessing Embedded Web Server RX
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the
host name.
Examples: https://192.168.48.21/ (for IP address)
https://P001 (if the host name is "P001")
The web page displays basic information about the machine and
Embedded Web Server RX as well as their current status.
Note If the screen There is a problem with this website's
security certificate. is displayed, configure the certificate.
For details on Certificates, refer to the Embedded Web Server
RX User Guide.
You can also continue the operation without configuring the
certificate.
3
Select a category from the navigation bar on the left of the screen.
When you log in to the machine as an administrator, you will see
Device Settings, Function Settings, Network Settings, Security
Settings, and Management Settings.
2-5
Printing Operation
Administ- General
rator User
—