Triumph Adler P-C2160DN Operation Manual page 121

>>FTP(Server)
? On
>>SNMP
? On
>>SMTP
? Off
4
Select On or Off using  or .
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
FTP (Server) (FTP (Server) setting)
Select whether or not to receive documents using FTP.
1
Press  while >Protocol Detail > is displayed.
2
Press  or  repeatedly until >>FTP(Server) appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using  or .
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
SNMP (SNMP setting)
Select whether or not to communicate using SNMP.
1
Press  while >Protocol Detail > is displayed.
2
Press  or  repeatedly until >>SNMP appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using  or .
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
SMTP (SMTP setting)
Select whether or not to send email using SMTP.
1
Press  while >Protocol Detail > is displayed.
2
Press  or  repeatedly until >>SMTP appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Select On or Off using  or .
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
POP3 (POP3 setting)
Select whether or not to receive email using POP3.
1
Press  while >Protocol Detail > is displayed.
2
Press  or  repeatedly until >>POP3 appears.
4-53
Using the Operation Panel