Ricoh D017 Service Manual page 1009

6800E4(H) - User parameter switch 20 (SWUSR_14)
Bit 0: Automatic printing of the LAN fax result report, 0: Off, 1: On
Bit 1: Not used
Bits 2 to 5: Store documents in memory which could not be printed from PC fax (LAN
fax) driver
Bit 5 Bit 4 Bit 3
0 0 0
0 0 0
. . . and so on, until . . .
1 1 1
1 1 1
Bits 6 and 7: Not used.
6800E5(H) - User parameter switch 21 (SWUSR_15)
Bit 0: Print results of sending reception notice request message, 0: Disabled (print only
when error occurs), 1: Enabled
Bit 1: Respond to e-mail reception acknowledgment request, 0: Disabled, 1: Enabled
Bit 2: Not used
Bit 3: File format for forwarded folders, 0: TIFF, 1:PDF
Bit 4: Transmit Journal by E-mail, 0: Disabled, 1: Enabled
Bit 5: Not used
Bit 6: Network error display, 0: Displayed, 1: Not displayed
Bit 7: Transmit error mail notification, 0: Enabled, 1: Disabled
6800E6(H) - User parameter switch 22 (SWUSR_16)
This switch is not printed on the user parameter list.
Bit 0: Dial tone detection (PSTN 1), 0: Disabled, 1: Enabled
Bit 1: Dial tone detection (PSTN 2), 0: Disabled, 1: Enabled
Bit 2: Dial tone detection (PSTN 3), 0: Disabled, 1: Enabled
Bits 3 to 7: Not used
SM
Bit 2 Setting (minutes)
0 0
1 1
0 14
1 15
191
Service RAM Addresses
D361/D510