Ricoh D017 Service Manual page 621

System SP Tables-8
807x 3 3 Pages
807x 4 4 Pages
807x 5 5 Pages
807x 6 6to10 Pages
807x 7 11 to 20 Pages
For example: When a copy job stored on the document server is printed in document
server mode, the appropriate L: counter (SP8076 0xx) increments.
Printing a fax report counts as a job and increments the F: counter (SP 8073).
Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
If a job is paused and re-started, it counts as one job.
If the finisher runs out of staples during a print and staple job, then the job is counted at
the time the error occurs.
For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying
the number of sets of copies by the number of pages scanned. (One duplex page
counts as 2.)
The first test print and subsequent test prints to adjust settings are added to the
number of pages of the copy job (SP 8072).
When printing the first page of a job from within the document server screen, the page
is counted.
T:FAX TX Jobs
These SPs count the total number of jobs (color or black-and-white)
8111
sent by fax, either directly or using a file stored on the document server,
on a telephone line.
F:FAX TX Jobs
8113
These SPs count the total number of jobs (color or black-and-white)
sent by fax directly on a telephone line.
D017/D018/D019/D020/D084/D085
807x 10 101 to 300 Pages
807x 11 301 to 500 Pages
807x 12 501 to 700 Pages
807x 13 701 to 1000 Pages
807x 14 More than 1001 Pages
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
4-188 SM Appendix