Ricoh D017 Service Manual page 1244

Installing Controller Options
ANT1. Antenna 1 transmits and receives. It must be installed on the front left
corner of the main machine. (The core on the Antenna 1 cable is black.)
ANT2. Antenna 2 only receives. It is installed on the rear right corner of the
machine.
To assure reliable data sending and receiving, Antenna 1 must be installed on
the front left corner of the machine.
2. Remove the seals from of the cable clamps and attach them to the left side of the
machine as shown above.
3. Attach Antenna 1 [A] to the left front corner of the machine. (The core on the Antenna 1
cable is black.)
4. Set the cable of Antenna 1 in the clamps and close them.
5. Remove the seals from the cable clamps and attach them to the rear of the machine as
shown above.
D383 16 SM