Ricoh D017 Service Manual page 1247

1.3.3 BLUETOOTH UNIT (B826)
Accessories
Check the accessories and their quantities against the following list:
No Description
1 Bluetooth Unit B826
2 PCI Card
3 Cap
Installation
Turn off the main power switch and disconnect the power supply cord.
1. Remove the plastic application cover (
2. Remove the cover [A] of board slot (
3. Attach the interface board [B] to the controller board (
Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
4. Install the Bluetooth card [C] in the slot in the Bluetooth unit.
5. Insert the antenna [D] into the Bluetooth card.
6. Attach the antenna cap [E].
SM
Installing Controller Options
Quantity
1
1
1
x1).
x1).
x2 knob screws).
19 D383