Ricoh D017 Service Manual page 1003

6800D3(H) - User parameter switch 03 (SWUSR_03: Automatic report printout)
Bit 0: Transmission result report (memory transmissions), 0: Off, 1: On
Bit 1: Not used
Bit 2: Memory storage report, 0: Off, 1: On
Bit 3: Polling reserve report (polling reception), 0: Off, 1: On
Bit 4: Polling result report (polling reception), 0: Off, 1: On
Bit 5: Transmission result report (immediate transmissions), 0: Off, 1: On
Bit 6: Polling clear report, 0: Off, 1: On
Bit 7: Journal, 0: Off, 1: On
6800D4(H) - User parameter switch 04 (SWUSR_04: Automatic report printout)
Bit 0: Automatic confidential reception report output, 0: Off, 1: On
Bit 1: Automatic communication failure report and transfer result report output, 0: Off,
1: On
Bits 2 to 3: Not used
Bit 4: Indicates the parties, 0: Not indicated, 1: Indicated
Bit 5: Include sender's name on reports, 0: Off, 1: On
Bit 6: Not used
Bit 7: Inclusion of a sample image on reports, 0: Off, 1: On
6800D5(H) - User parameter switch 05 (SWUSR_05)
Bit 0: Substitute reception when the base copier is in an SC condition, 0: Enabled, 1:
Disabled
Bits 1 and 2: Condition for substitute rx when the machine cannot print messages
(Paper end, toner end, jam, and during night mode)
SM
Service RAM Addresses
185 D361/D510