Specifying The Scan Settings; Adjusting Image Density; Selecting The Document Type According To Original - Ricoh SP 112SF User Manual

Specifying the Scan Settings

This section describes how to specify image density and scan quality for the current job.

Adjusting Image Density

There are five image density levels. The higher the density level, the darker the printout.
1. Make sure that the copier mode screen is displayed.
When the fax mode screen is displayed, press the [Copy/Facsimile] key to switch to the copier
mode screen.
2. Press the [ ] or [ ] key in the standby mode screen to select [Density], and then press the
[OK] key.
3. Press the [ ] or [ ] key to select the density level, and then press the [OK] key.
4. Press the [ ] key to return to the initial screen.
• To apply the specified setting to all jobs, specify [Density] in [Copier Features].

Selecting the Document Type According to Original

There are three document types:
Text
Select this when the original contains only text and no photographs or images.
Photo
Select this when the original contains only photographs or images. Use this mode for the following
types of original:
• Photographs
CXP104
Specifying the Scan Settings
63