Ricoh SP 112SF User Manual page 102

7. Configuring the Machine Using the Control Panel
Pause Time
Specifies the length of pause time when a pause is inserted between the digits of a fax
number.
Default: 3 seconds
• 1 to 15 seconds, in 1 second increments
Auto Redial
Sets the machine to redial the fax destination automatically when the line is busy or a
transmission error occurs.
Default: [On]
• Off
• On
Print Fax Header
Sets the machine to add a header to every fax you send. The header includes the current date
and time, user fax name and number, Session number, and page information.
Default: [On]
• Off
• On
Fax Mode
You can simplify the procedure for sending and receiving faxes by disabling the use of the
exposure glass. If originals are loaded in the ADF, you can fax them using the ADF in either
mode by pressing the [Start] key.
Default: [Advanced Mode]
• Easy Mode
If you select [Easy Mode], you can receive faxes by pressing the [Start] key. The
exposure glass cannot be used in this mode.
• Advanced Mode
If you select [Advanced Mode], you can specify whether to send or receive faxes after
pressing the [Start] key.
RX Settings
Switch RX Mode
Specifies the reception mode.
Default: [Auto]
• Auto
The machine automatically answers all incoming calls in fax reception mode.
• Manual
100