Ricoh SP 112SF User Manual page 82

6. Sending and Receiving a Fax
Specifying the destination using the redial function
This function saves time when you are sending to the same destination repeatedly, as you do not have to
enter the destination each time.
1. Make sure that the fax mode screen is displayed.
When the copier mode screen is displayed, press the [Copy/Facsimile] key to switch to the fax
mode screen.
2. Place the original on the exposure glass or in the ADF.
3. Press the [ ] or [ ] key to select [Redial], and then press the [OK] key.
4. Press the [Start] key.
Specifying the destination using the broadcast function
You can send a fax to multiple destinations simultaneously.
1. Make sure that the fax mode screen is displayed.
When the copier mode screen is displayed, press the [Copy/Facsimile] key to switch to the fax
mode screen.
80
CXP104
CXP103