Ricoh SP 112SF User Manual page 105

• 2.4 Kbps
Dial/Push Phone
Specifies the line type of the telephone line.
To configure this setting, contact your telephone company and select the setting based on
your telephone line. Selecting the wrong setting may result in transmission errors.
If you have set [Country Code] to [Australia], [New Zealand] or [Singapore], [Dial/Push
Phone] does not appear because the default is [Push Phone].
Default: [Push Phone]
• Push Phone
• Dial Phone (10PPS)
• Dial Phone (20PPS)
[Dial Phone (20PPS)] appears only if [Country Code] is set to [Japan] or [Thailand].
PSTN / PBX
Sets the machine to connect to a public switched telephone network (PSTN) or a private
branch exchange (PBX).
Default: [PSTN]
• PSTN
• PBX
PBX Access Number
Specifies the dial number to access the external line when the machine is connected to a PBX.
Make sure that this setting matches your PBX settings. Otherwise, you may not be able to send
faxes to external destinations.
Default: 9
• 0 to 999
Fax No. Confirmation
If this setting is enabled, when trying to send a fax by manually entering a fax number, the
user will be prompted to re-enter the number for confirmation. If the numbers do not match,
the fax cannot be sent.
Default: [Off]
• Off
• On
Report Print Set.
TX Status Report
Sets the machine to print a transmission report automatically after a fax transmission.
Default: [Error: With Image]
Fax Features Settings
103