Canceling A Copy - Ricoh SP 112SF User Manual

• If there is a paper jam in the ADF, open the ADF cover, and then remove the jammed paper.
Specify the copy setting again from the page where the paper jammed.
• If the paper runs out, replenish it, and then press the [Start] key to resume printing.

Canceling a Copy

If copying is canceled while scanning an original placed on the exposure glass, copying is canceled
immediately and there is no printout. If copying is canceled while scanning a multiple-page original
placed in the ADF, scanning stops halfway at the current page.
1. Make sure that the copier mode screen is displayed.
2. Press the [Clear/Stop] key.
3. Press the [1] key.
To cancel printing, press the [1] key (1: Yes). To continue printing, press the [2] key (2: No).
CXP104
CXP102
Basic Operation
51