Ricoh SP 112SF User Manual page 81

2. Place the original on the exposure glass or in the ADF.
3. Press the [Speed Dial] key.
4. Enter the Speed Dial number using the number keys, and then press the [OK] key.
5. Press the [Start] key.
When you place original on the exposure glass and Memory Transmission mode is enabled,
perform the following steps to scan the subsequent pages of the original.
6. If you have more originals to scan, press the [1] key within 60 seconds, place the next
original on the exposure glass, and then press the [OK] key. Repeat this step until all
originals are scanned.
7. When all originals have been scanned, press the [2] key to start sending the fax.
CXP104
CXP106
CXP103
Sending a Fax
79