Ricoh SP 112SF User Manual page 112

7. Configuring the Machine Using the Control Panel
Default: [Off]
• On
• Off
Registration
Adjusts the position of the input tray. Adjust the value by using the [ ] or [ ] key.
To check the registration, print a test page.
Default: 0
• Horizontal (-6 to +6 mm, in 1 mm increments)
• Vertical (-6 to +6 mm, in 1 mm increments)
Adjust Image Density
Adjusts the density of printing.
Default:
•
•
•
•
•
•
•
Toner End Option
This setting is used to monitor the toner level.
Default: [Stop Printing]
• Stop Printing
Monitoring the toner level is enabled. The remaining toner level can be checked in the control
panel and on the Smart Organizing Monitor.
• Continue Printing
The machine no longer monitors the toner level. Even when the toner runs out, printing will
continue and no messages will be displayed.
• For details about print cartridge and toner, see page 149 "Notes About the Toner".
Reset Settings
• Reset All Settings
Resets all settings to the factory default, except for the language, date and time, and fax
Speed Dialing settings.
110
(Lightest)
(Darkest)