Ricoh SP 112SF User Manual page 84

6. Sending and Receiving a Fax
Sending a fax using On Hook Dial
The On Hook Dial function allows you to check the destination's status while listening to the tone from the
internal speaker. This function is useful when you want to ensure that the fax will be received.
• The procedure differs depending on whether [Fax Mode] is set to [Easy Mode] or [Advanced
Mode] in [TX Settings] in [Fax Features].
• To send faxes using the exposure glass, be sure to first remove any originals loaded in the ADF.
1. Make sure that the fax mode screen is displayed.
When the copier mode screen is displayed, press the [Copy/Facsimile] key to switch to the fax
mode screen.
2. Place the original on the exposure glass or in the ADF.
If [Fax Mode] is set to [Easy Mode], you cannot send faxes using the exposure glass.
3. Press the [ID Card Copy/On Hook Dial] key.
4. Add a destination by using one of the following methods:
To add a Speed Dial destination
1. Press the [Speed Dial] key.
82
CXP104
CXP105