Port Isolate - Planet MGSW-28240F User Manual

4.6.10.3 Port Isolate

The diagram shows how the Managed Switch handles isolate and promiscuous ports, and the each PC is not able to access
each other PCs of each isolate port. But they all need to access with the same server/AP/Printer. The screen in
appears. This section will show you how to configure the port for the server – that could be accessed by each isolate port.
Setup steps
1. Assign Port Mode
Set Port-1~Port-4 in Isolate port.
Set Port5 and Port-6 are in Promiscuous port. The screen in
2. Assign VLAN Member :
VLAN 1 : Port-1,Port-2 ,Port-5 and Port-3
VLAN 2 : Port-3~Port-6. The screen in
Figure 4-6-14: The Port Isolate VLAN Diagram
Figure 4-6-15: The Configuration of Isolate and Promiscuous Port
Figure 4-6-16
Figure 4-6-15 appears.
appears.
147
User's Manual of MGSW-28240F
Figure 4-6-14