Planet MGSW-28240F User Manual page 207

24-port 100/1000base-x sfp with 4-port 10g sfp+ managed metro ethernet switch

Hide thumbs Also See for MGSW-28240F:

Table of Contents

The page includes the following fields:

• Schedule Mode

• Queue Shaper Enable

• Queue Shaper Rate

• Queue Shaper Unit

• Queue Shaper Excess

• Queue Scheduler

• Queue Scheduler

• Port Shaper Enable

Figure 4-9-3: QoS Egress Port Schedule and Shapers Page Screenshot

Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this

switch port.

Controls whether the queue shaper is enabled for this queue on this switch port.

Controls the rate for the queue shaper. The default value is 500. This value is

restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to

1-3300 when the "Unit" is "Mbps".

Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps".

The default value is "kbps".

Controls whether the queue is allowed to use excess bandwidth.

Controls the weight for this queue. The default value is "17". This value is

restricted to 1-100. This parameter is only shown if "Scheduler Mode" is set to

Shows the weight in percent for this queue. This parameter is only shown if

"Scheduler Mode" is set to "Weighted".

Controls whether the port shaper is enabled for this switch port.

User's Manual of MGSW-28240F