Planet MGSW-28240F User Manual page 243
24-port 100/1000base-x sfp with 4-port 10g sfp+ managed metro ethernet switch
Hide thumbs
Also See for MGSW-28240F:
- User manual (643 pages) ,
- Quick installation manual (16 pages) ,
- Command manual (433 pages)
Table of Contents
Advertisement
ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
Object
•
ARP/RARP
•
Request/Reply
•
Sender IP Filter
•
Sender IP Address
•
Sender IP Mask
• Target IP Filter
• Target IP Address
• Target IP Mask
priority. The allowed number range is 0 to 7. The value Any means that no tag
priority is specified (tag priority is "don't-care".)
Description
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
ARP: Frame must have ARP/RARP opcode set to ARP.
RARP: Frame must have ARP/RARP opcode set to RARP.
Other: Frame has unknown ARP/RARP Opcode flag.
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
Request: Frame must have ARP Request or RARP Request OP flag
set.
Reply: Frame must have ARP Reply or RARP Reply OP flag.
Specify the sender IP filter for this ACE.
Any: No sender IP filter is specified. (Sender IP filter is "don't-care".)
Host: Sender IP filter is set to Host. Specify the sender IP address in
the SIP Address field that appears.
Network: Sender IP filter is set to Network. Specify the sender IP
address and sender IP mask in the SIP Address and SIP Mask fields
that appear.
When "Host" or "Network" is selected for the sender IP filter, you can enter a
specific sender IP address in dotted decimal notation.
When "Network" is selected for the sender IP filter, you can enter a specific
sender IP mask in dotted decimal notation.
Specify the target IP filter for this specific ACE.
Any: No target IP filter is specified. (Target IP filter is "don't-care".)
Host: Target IP filter is set to Host. Specify the target IP address in the
Target IP Address field that appears.
Network: Target IP filter is set to Network. Specify the target IP
address and target IP mask in the Target IP Address and Target IP
Mask fields that appear.
When "Host" or "Network" is selected for the target IP filter, you can enter a
specific target IP address in dotted decimal notation.
When "Network" is selected for the target IP filter, you can enter a specific target
IP mask in dotted decimal notation.
243
User's Manual of MGSW-28240F
Advertisement
Table of Contents
