6.26 MEP Command
mep config
Description:
MEP instance configuration.
Syntax:
MEP config [<inst>] [mep|mip] [ingress|egress] [<port>] [domport|domevc] [<level>] [itu|ieee] [<meg>] [<mep>] [<vid>] [<flow>]
[enable|disable]
Parameters:
<inst>
: Instance number.
mep|mip
: Mode of the MEP instance.
ingress|egress: Direction of the MEP instance.
<port>
: Port number.
domport|domevc: Flow domain.
<level>
: MEP level (0-7).
itu|ieee
: MEG format.
ITU: ICC format as defined in Y.1731 ANNEX A.
IEEE: String format Domain Name and Short Name as defined in 802.1ag.
<meg>
: MEG ID (max. 8 chars).
<mep>
: This MEP id (0-0x1FFF).
<vid>
: C-TAG only applicable for Port MEP.
<flow>
: Flow instance number (Port/EVC).
enable|disable: enable/disable.
Example:
st
Add 1
instance and indicate residence port to port1, and 1 for flow instance, and Tagged ID is 3001. MEP Peer set to 3
for MEP instance 1.
MGSW-28240F:/MEP>mep config 1 mep ingress 1 0 itu meg000 3 3001 1 enable
mep peer
Description:
MEP Peer MEP id configuration.
User's Manual of MGSW-28240F
611