Product Descriptions - Planet MGSW-28240F User Manual

User's Manual of MGSW-28240F

1.2 Product Descriptions

Multiple SFP Fiber Port Switch for Increasing Long-reach Networking of Enterprise, Telecoms and Campus
The MGSW-28240F is equipped with advanced management functions and provides 24 100/1000Mbps dual speed SFP fiber
ports, 4 1/10Gbps dual speed fiber ports and 4 10/100/1000Mbps TP/SFP ports delivered in a rugged strong case. It is capable
of providing non-blocking switch fabric and wire-speed throughput as high as 128Gbps in the temperature range from -10 to 60
degrees C without any packet loss and CRC error, which greatly simplify the tasks of upgrading the enterprise LAN for catering
to increasing bandwidth demands. The MGSW-28240F is specially designed for service provider to deliver profitable Ethernet
network. The MGSW-28240F adopts "Front Access" design, making the wiring and maintenance of the MGSW-28240F placed
in a cabinet very easy for technicians.
Support 10Gb Ethernet
10Gb Ethernet which adopts full-duplex technology instead of low-speed, half-duplex CSMA/CD protocol, is a big leap in the
evolution of Ethernet. 10Gb Ethernet can be deployed in star or ring topologies. With 10Gb Ethernet, MGSW-28240F switch
provide broad bandwidth and powerful processing capacity. It is suitable for metropolitan networks and wide area networks.
Using MGSW-28240F switch, users can simplify network structures and reduce cost of network construction.
Optimized Design for Metropolitan Area Network Redundant Ring, Fast Recovery for Surveillance or
Industrial System
The MGSW-28240F supports redundant ring technology and features strong rapid self-recovery capability to prevent
interruptions and external intrusions. It incorporates ITU G.8032 Ethernet Ring Protection Switching technology, Spanning Tree
Protocol (802.1w RSTP), and redundant power supply system into customer's industrial automation network to enhance system
reliability and uptime in harsh factory environments. The IGS-10020PT also protects customer's industrial network connectivity
with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the
Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network
back to normal operation.
Cost-effective IPv6 Managed Gigabit Switch Solution for Metro
Nowadays, lots of electronic products or mobile devices can browse the Internet, which means the need of IP Address
increases. However, the current IPv4 network infrastructure is not capable enough to provide IP Address to each single
user/client. The situation forces the ISP to come out with the IPv6 (Internet Protocol version 6) network infrastructure. To fulfill
the demand, PLANET releases the IPv6 management Gigabit Ethernet Switch. It supports both IPv4 and IPv6 management
functions. It can work with original network structure (IPv4) and also support the new network structure (IPv6). With easy and
friendly management interfaces and plenty of management functions included, the MGSW-28240F Managed Switch is the best
choice for you to build the IPv6 FTTx edge service and for Industries to connect with IPv6 network.
23