Ethernet Ring Protocol Switch - Planet MGSW-28240F User Manual

• Type
• Last Octet
Buttons
: Click to go to Fault Management page.
: Click to refresh the page immediately.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.19.3 Ethernet Ring Protocol Switch

The Ethernet Ring Protection Switch instances are configured here; screen in
The page includes the following fields:
Object
• Delete
• Port 0
• Port 1
• Port 0 SF MEP
in G.8032.
R-APS: APS PDU is transmitted as R-APS - this is for ERPS.
L-APS: APS PDU is transmitted as L-APS - this is for ELPS.
This is the last octet of the transmitted and expected RAPS multi-cast MAC. In
G.8031 (03/2010) a RAPS multi-cast MAC is defined as 01-19-A7-00-00-XX. In
current standard the value for this last octet is '01' and the usage of other values
is for further study.
: Click to go to Performance Monitor page.
Figure 4-19-3: Ethernet Ring Protocol Switch page screenshot
Description
This box is used to mark an ERPS for deletion in next Save operation.
This will create a Port 0 of the switch in the ring.
This will create "Port 1" of the switch in the Ring. As interconnected sub-ring will
have only one ring port, "Port 1" is configured as "0" for interconnected sub-ring.
"0" in this field indicates that no "Port 1" is associated with this instance
The Port 0 Signal Fail reporting MEP.
User's Manual of MGSW-28240F
Figure 4-19-3
373
appears.