Port Isolate - Planet SGS-5220-24P2X User Manual
L2+24-port 10/100/1000t+4-port shared sfp+2-port 10g sfp+ managed stackable switch sgs-5220 series
Hide thumbs
Also See for SGS-5220-24P2X:
- Quick installation manual (17 pages) ,
- Command manual (433 pages)
Table of Contents
Advertisement
6.
Repeat Steps 1 to 6, set up the VLAN Trunk port at the partner switch and add more VLANs to join the VLAN trunk, repeat
Steps 1 to 3 to assign the Trunk port to the VLANs.
4.6.7.3 Port Isolate
The diagram shows how the Managed Switch handles isolated and promiscuous ports, and the each PC is not able to access
the isolated port of each other's PCs. But they all need to access with the same server/AP/Printer. This section will show you
how to configure the port for the server – that could be accessed by each isolated port.
Setup steps
1.
Assign Port Mode
Set Port-1~Port-4 in Isolate port.
Set Port5 and Port-6 in Promiscuous port. The screen in
Figure 4-6-16
Figure 4-6-17: The Configuration of Isolated and Promiscuous Port
126
User's Manual of SGS-5220 Series
appears.
Advertisement
Table of Contents
