TRE0859A
Both sides of the tractor are equipped with threaded
holes for connecting implements and auxiliary
equipment.
The figure shows the free fixing holes on the
left--hand side of the tractor, which are identical and
symmetrical to the fixing holes on the right--hand
side.
3--26
SECTION 3 - - FIELD OPERATIONS
EQUIPMENT MOUNTING POINTS
TD 60D, TD 70D, TD 80D and TD 90D Models
NOTE: Use exclusively the holes specified in fig. 34
when mounting auxiliary equipment. .
The use of different holes for auxiliary applications
automatically exonerates New Holland from all
liability in relation to damage vehicle or injury to
persons, resulting from failure to observe the relative
regulations.
34