STARTING WITH THERMOSTART
Start as follows:
--
carry out the operations a, b, c as previously
described.
--
turn the ignition key to position B (1) fig. 1.
--
activate the thermostart by pressing switch (2)
fig. 2 and keep it pressed for 25 seconds.
--
move the ignition key to position (C) while
continuing to hold down switch (2) fig. 2 until the
engine starts.
--
when the engine starts, release both the key and
the thermostart switch. If, after two or three
attempts, the engine has not started and you
notice black smoke coming from the exhaust,
start the engine without using the thermostart.
SECTION 3 - - FIELD OPERATIONS
2
A
B
P
C
1
1
2
3--3