New Holland TD 60D Operator's Manual page 181

OPERATION OF AUTOMATIC PICK- -UP
HITCH (not available in all markets)
This system makes it possible to tow trailers, imple-
ments and agricultural machinery with a ring type
drawbar. All hitching and unhitching operations can
be performed without leaving the driving seat.
Hitching
To lower the hook and couple the implement, pro-
ceed as follows:
-- remaining seated in the driving seat, move the
position control lever (3) fig. 11 fully rearward
and draft control lever (2) fig. 11 fully forward.
-- press the Lift--O--Matic
-- pull and hold the release lever (1) fig. 12 upwards
to disengage the locking hooks, at the same time
gradually move the position control lever (3)
fig. 11 forward until the hitch hook has lowered;
-- release the lever (1) fig. 12;
-- reverse the tractor and align the hitch hook under
the trailer drawbar ring;
-- raise the hook by moving the position control
lever (3) fig. 11 slowly rearward; the hook will
engage the ring and the implement will be
automatically hitched as confirmed by the
audible click made by locking hooks (1) and (4)
fig. 13 on the pins (2) and (3);
-- when the implement is hitched, move the posi-
tion control lever (3) fig. 11 slightly forward so
that the weight of the hitch is supported by the
locking hooks (1) and (4) fig. 13;
-- press the Lift--O--Matic
prevent inadvertent lowering of the hitch if the
lever (3) fig. 11 is moved accidentally.
CAUTION
Before moving, check that the hooks (1) and (4)
fig. 13 are correctly locked on the pins (2) and (3).
SECTION 7 - - ACCESSORIES
TM
button (1) fig. 11;
TM
button (4) fig. 11 to
3
2
TRE0901A
4
3
MPB0396A
4
1
1
1
2
7--7
11
12
13