Table of Contents
Advertisement
POWER TAKE- -OFF SPEED
540 rev/min power take- -off
The 540 rev/min power take--off is equipped with a
3
six--splined 1
/
in. output shaft (1) fig. 10 (standard).
8
540/750 rev/min power take- -off
This version is available as an option.
The six--splined output shaft (1) fig. 3 is 1
diameter, the same as for 540 rev/min power
take--off.
To obtain a speed of 540 or 750 rev/min, use the
speed selector lever (1) fig. 12.
540/750/1000 rev/min power take- -off
It has two interchangeable output shafts (2) fig. 9:
3
one 1
/
in. diameter with six splines for speeds of
8
540 and 750 rev/min and one 1
twenty--one splines for speeds of 1000 rev/min. To
change the output shaft, remove the bolts (1) fig. 11
for power take--off.
CAUTION
Use the power take--off at 1000 rev/min only after
fitting the appropriate 1
output shaft from the accessories kit.
Power take- -off speeds:
--
540 rev/min with engine at:
--
614 rev/min with engine at:
--
750 rev/min with engine at:
--
787 rev/min with engine at:
--
540E rev/min with engine at:
--
1000 rev/min with engine at:
--
1050 rev/min with engine at:
SECTION 3 - - FIELD OPERATIONS
3
/
8
3
/
in. diameter with
8
3
/
in. diameter, 21--splined
8
2199 rpm
2500 rpm
2380 rpm
2500 rpm
1715 rpm
2380 rpm
2500 rpm
in. in
1
TRE0809A
NOTE: With the power take--off speed selector lever
set to 750 rev/min, 540 rev/min can also be obtained
on the output shaft with the engine at 1715 rev/min.
1
1
2
1
10
11
3--9
Advertisement
Table of Contents
