Table of Contents
Advertisement
Adjustable top link - - Fig. 28
The top link (1) can be connected to the attachment
bracket via one of two holes. Select the most suitable
hole for attaching the implement.
Use the upper hole for maximum lift capacity and the
greatest implement to cab clearance. Use the lower
hole for the best ground penetration.
To adjust the top link, rotate the sleeve using the
tommy bar (2). Top link length must not exceed 870
mm (34.25 in).
The top link can be removed or held by catch (3)
when it is not in use.
Top link attachment bracket - - Fig. 29
NOTE: When the top link retaining pin (4) fig. 28 is
inserted, ensure that the safety tang on the end of the
retaining pin is in the smaller hole (2) fig. 29.
Left- -hand lift rod - - Fig. 30
Adjust the length of lift rod (1) by tightening or
unscrewing the lower end (2). Adjust the rod length
as necessary so that the implement can be set in its
working position parallel to the ground.
3--24
SECTION 3 - - FIELD OPERATIONS
2
1
TRE0819A
1
TRE0820A
3
4
28
29
30
Advertisement
Table of Contents
